2. misc-audio
  3. 136906-1386

High Fidelity Cables MC 1-PRO

Just plugged it into my system yesterday. So it only has about 10 hours on it. First impressions The sound became more detailed in the mid range really opens up nice. (not harsh or lean). The base is tighter but not as deep as before. I experience the same base problem when i started breaking in High Fidelity MC 6 Hemisphere. The base with the Hemisphere took a long while, but came in great (Better than orginal) after it had 500 plus hours on it. So for now i am not worried about that. Since High Fidelity recommends about 400 hours before the MC 1 Pro settles in. The sound stage as a whole is much more defined feels sound like it has more energy, but it did shrink a little again i feel this will get better than it was with reaching the 400 hour mark. I am very happy with the over all sound my systems has since adding the MC 1-Pro and thinking about adding another one.
I did plug the MC 1-PRO in at the wall with my 21 MC 0.5s all on the same line that feeds the MC 6 Hemisphere. Which feeds my front end, TV and Sat. box. i all so have 6 MC 0.5 plugged into the Hemisphere. The Pro and the MC 0,5s sound very good together and a nice match up. Will report more as i get more time on the MC 1 PRO.
enjoy Pete
68pete
Post removed 
gkg2k
21 posts
 
Hello, I need a placement recommendation.

I'm considering an "MC-1 Pro Double Helix Plus Signature". I already have a PLIXIR isolation transformer-based AC conditioner. Would you place the HFC filter *before* the PLIXIR (in the same wall plate where the PLIXIR is connected) or *after* the PLIXIR (in one of its 8 outlets).
I wouldn't want the big 3Kw balanced isolation transformer to "reset" the magnetic work of the MC-1 Pro Double Helix Plus Signature.
Thank you very much!
Gianluca
68pete OP
991 posts
 
Hello gkg2k
I have several MC-1 Pro Double Helix Plus Signature wave guides in my system, not to mention many of the other wave guides. Divided between to power lines. One 15 amp line for all of my front end and then a 20 amp line for my power amp.  I am not familiar with your power conditioner. You could contact Rick Shultz at High Fidelity Cable and ask him what he thinks with your power conditioner. He is very easy to talk too. I have used PS Audio P10, and found out at the wall plate was the biggest increase in performance. Later replaced the P10 with High Fidelity  MC 6 Hemisphere conditioner for better results. Then upgrade to the High Fidelity Pro Power Conditioner for even better sound. I would try at the wall plate first, that way everything plugged into your conditioner would benefit. Just remember to give it at least 400 or more hours at the wall. Before making any kind of decisions. You can always move it later to the rear of your power conditioner.
There is no right answer, what works (sounds) best for you is the correct spot.  If you move it around it will need time to settle back in each time. please report back on your journey
Good luck Pete
gkg2k
21 posts
 
Thank you so much for the suggestions Pete!
I want the MC-1 Pro Double Helix Plus Signature to be to its full potential in my system. I'll start at the wall plate following your experience.
Congratulations for your system, two dedicated power lines for front end and power amp is a great idea.
I'll keep you posted about the HFC top wave guide as soon as I receive it.
Regards,Gianluca
68pete OP
991 posts
 
gkg2k
If you can swing it. I would recommend High Fidelity NPS 1260 contact enhancer. Well worth the money and it will take your MC-1 Pro to the next level. Along with your entire system.
More to discover