If you have a "kick booty" DAC, does the transport


really matter as it is just a "reader" correct. Am I over simplifying it. When you plug your player into an outboard DAC don't it bypass the internal dac and stuff and shoot it to the outboard? Isn't the laser just reading the 1010101 on the disc and shooting the data to the DAC? If this is true can't a Joe just get a whatever player with coax/i.r./esbu out and just invest in a high horsepower DAC?
mtandrews
Kthomas,

One further note - the reason you don't have this problem in a computer is because of the "system clock". This high frequency clock signal is fed to all parts of the system, and synchronizes all data transfers, even between boards, at the bit level.

In a system like the standard CD transport/DAC, each box has its own clock and the two are not synchronized. This is a theoretical argument in favour of one-box players. Of course it only addresses one issue (timing), and there are plenty of other ways to muck up a high-frequency signal.
A DAC that doesn't separate itself from the player with its own clocking must rely upon a very expensive player and a very expensive digital cable for the timing and delivery of the bits. That is, for the feeding of the bits to the digital converter chip.

Some modern DACs, in different ways--some more successful than others, have overcome this problem by reclocking the data making it possible to use a wide variety of relatively inexpensive players, including those that play SACDs and DVDs as well as CDs. They can do this with no sacrifice of audio quality on that account.

Of course how they handle the analog signal delivered from the converter chip will always have an effect on the sound.
Cable Quality?... SC Pulse transformers, and cat5 cable will blow many highend digitals out the water! USB has issues too.
Mel, true about the reclocking the data thing, but,
Truth is, It is limited to the quality of the data it's fed. It starts from the Extractment of data from the media.
;c)

Anthony
Anthony,

I am persuaded that, aside from the timing (important to audiophiles), a bit is a bit. Why do I think that? Because the CHEAPEST CD ROM drive can provide a PERFECT set of bits to a computer hard drive every time. If that were not true, and it made a mistake with only ONE bit, the computer program copied would crash.

So the bits are there, and a modern reclocking scheme can feed them to the converter chip exactly as intended without reference to the "extracting" unit.

And my ears tell me it works.