Good budget amp for Mirage M1

I used an Aragon 2004 Mk II for several years on Mirage M5si with very good results. While not optimal for the M1, it would be better than what you are using. An Acurus A250 would probably work well also. I second a look at the Emotiva amps in your price range. Stretch your budget just a little and the Parasound Halo A23 becomes an option.

I'm a long time owner of Mirage floorstanding speakers, including a pair of M5si's I've had for 16 years. You definitely want both power and current, and large gauge cable going to the woofer inputs. I use a 6-gauge cable run to my bi-wirable M5si's. I'd use *at least* 12-gauge wire with the M1s.

The factory specs for the M1 indicate a sensitivity of 83 dB. This is *low*. You need to aim for the most power and current you can get at your budget, preferably high current amps in the 150-200 wpc neighborhood. You can find used high current, high power amps within your budget from Adcom, Parasound, Rotel, older PS Audio, and--as mentioned--Aragon.

If you're willing to go a bit above budget, you can get a new warranteed pair of 200-watt Outlaw Audio M2200 monoblocks for $700.

I just remembered: They aren't nearly as common as used Adcoms, but a *really good* amp well within your budget is the Heathkit AA-1600. I use one of these to power a pair of Mirage OMD-15s and it's marvelous. It's rated at 120 wpc but I think it's actually more like 180. It weighs 41 lbs which is more in keeping with a high current 150-180 wpc amp and it acts and sounds like it.

I picked mine up in very good condition just last summer for $239 at a retail hi-fi store. That's about what they go for on eBay. Even better is its high-powered big brother, the AA-1800. Those go for more like $600-750 but are easily worth it. Very well built, really good-sounding, fast and articulate without being edgy. The AA-1800 was rated at 250 wpc but typically puts out 350.

The M1's need alot of power.
For the price your looking to spend, i would look to the Emotiva XPA-2. This amp lists for 800$ and is built like a tank. It weighs like 75 pounds and is high current with a really good sound.
Here's a review of it.
http://positive-feedback.com/Issue58/emotiva_xpa.htm

04-09-12: Doug99
The M1's need a lot of power. ...Look to the Emotiva XPA-2. This amp lists for $800 and is built like a tank. It weighs like 75 pounds and is high current with a really good sound.

Yes. That's an even better suggestion than the Outlaw monoblocks I mentioned. 100 wpc more for only an extra $100. Right now they're on backorder but worth the wait. Given that the 1st-gen M1s weren't bi-ampable (except by special order), a fast 300 wpc high current stereo amp is a good idea.