I can read and understand just fine , but thanks for your concern that it might be an issue.
So done with audiophile fuses
The journey started with a medium priced ($50) fuse in my power supply. A failed rectifier tube blew that one out. Not a fuse problem. Next up was a blue fuse in my pre amp. It blew and was not caused by a pre amp problem. Apparently they sometimes are more sensitive and it was replaced by an orange fuse two values higher. Things were going along fine. I replaced the pre amp with a newer version of the pre amp and it has the same fuse value. Five months latter (today) I turn on the pre amp and nothing. it's a five month old pre amp so I suspected that it was the fuse. Sure enough, I replaced it with a ceramic Littelfuse of the lower correct value it works fine. No more wasting my money on unstable fuses for me.
- ...
- 162 posts total
| Post removed |
| Post removed |
I may give the Hifi fuses another swing. The only reason it blew was because of a bad rectifier tube in my power supply. It also took out the original glass fuse. I will say that it seemed to be more stable than the blue or orange fuse since it was working fine at it's stated value. Just my experience, others have had better results. |
Since the "audiophile fuses" "manufacturers" recommend a higher value...the fuse is supposed to be a safety feature to prevent things like a fire in case of circuit failure...why don't you try a higher value regular fuse and see if you hear any difference? I'd like to hear of your experience if there's any grand difference. |
- 162 posts total