Low-sensitivity speakers — What's special about them?


I'm building a system for a smaller room (need smaller bookshelves), and I did a bunch of research and some listening. I am attracted both to the Dynaudio Evoke 10's (heard locally) and the Salk Wow1 speakers (ordered and I'm waiting on them for a trial). I have a Rel 328 sub.

Here's the thing — both of those speakers are 84db sensitivity. Several people on this forum and my local dealer have remarked, "You should get a speaker that's easier to drive so you have a wider choice of power and can spend less, too."

That advice — get a more efficient speaker — makes sense to me, but before I just twist with every opinion I come across (I'm a newbie, so I'm pathetically suggestible), I'd like to hear the other side. Viz.,

QUESTION: What is the value in low sensitivity speakers? What do they do for your system or listening experience which make them worth the cost and effort to drive them? Has anyone run the gamut from high to low and wound up with low for a reason?

Your answers to this can help me decide if I should divorce my earlier predilections to low-sensitivity speakers (in other words, throw the Salks and Dyns overboard) and move to a more reasonable partner for a larger variety of amps. Thanks.
128x128hilde45
What it comes down to is... really good mids with any type of top end extension without cone break up is hard to find in true high sensitivity speakers.  It has already been mentioned about bass.... The bigger the magnet/motor structure of a woofer, the more sensitivity and the more mass it needs to produce low fs/Qts.... these are attributes that lead to deep bass.  As you as you ad mass fs goes down and qts goes up,  but the trade off is that sensitivity goes down.  
Its not a perfect world.  I try to find the sum of parts as a whole to start the design process. Not being able to find any single part can kill an entire speaker project.  
Alot of people really like sealed box speakers for bass, I am one of them, but woofers that work well in a sealed box need a qts of a minimum of .4 and preferably .5 or even a bit higher.... Look at spec's on high sensitivity woofers,  you'll see .2 to .35.  This is just too low to produce bass in a sealed box system,  Although .35 can produce very satisfying bass in a ported or vented design.  You also have to consider that most good designers prefer to keep the crossover out of the vocal range,  so again,  it requires drivers with a fair amount of extension on the top end or bottom to pair with other drivers. 
There are plenty of excellent parts to design high quality low to medium sensitivity 2 or 3 way systems with great results. 
Every speaker, to some extent, makes some trade offs, and, at all price points, imo. The thing is, as a listener, we need to determine, what musical parameters of recorded music, are most desirable to each of us. And as explained above, the speaker / amp / room combination, should be matched as close as possible, to work together. Someone above, although appreciating the efficiency of horns, prefers other things. I, on the other hand, prefer horns, and the efficiency, is simply, icing on the cake. Advice : Take you time, and listen to as much gear as you can. Also, go listen to some live, " un-amplified " music, as this will give you an indication, as what to listen for, in audio gear ( speakers, specifically ). My best, and Enjoy ! MrD.
I’ve always gravitated to lower sensitivity speakers mainly because they were the speakers I enjoyed the most. Pluses and minuses either way I suppose. Dynaudio makes excellent speakers if you buy the Evokes I bet you would be quite happy. Down the road you could consider the opposite and drive a highly sensitive speaker with a low wattage tube amp, that is what makes this hobby fun.
Right now I am enjoying Magnepan LRS speakers that are quite different from box speakers. Could I go back to Dynaudio or Totem someday - probably. Anyway my point is buy what sounds good to you, no matter what you buy you’ll have to match it up with proper amps / stands / Dac anyway so don’t sweat it. 
The advice to get speakers that I enjoy and then find the amps to match is how I was initially going forward.  It was the warning that I might be boxing myself in that caused me to reconsider the speakers that I had heard and enjoyed. But there are more speakers out there and some of them might be higher efficiency...so there’s no harm in just doing more listening! Of course if some delightful and expensive tube amplifiers really make a big difference to the sound, well, then, it might not hurt to consider that as a potential orienting factor for the speakers! You see how I get turned around and around! Still, it makes sense to start with the speakers. 
I have a bedroom system w Sierra2ex 89db sensitivity. I run a pair of 80w class a monoblocks and a pair of REL t-zero. I can rock the entire house from that little system. I was worried about the same thing, but I gambled on this and won.