Pass Labs and Fuses


I continue to enjoy my Pass Labs Int-60 amplifier with my horn based system. My listening area has been intensively treated for acoustic - speaker interaction and it is always a joy for me to listen to a Dialed In system.

For my latest listening experiment I decided to evaluate the sonic differences using three fuses in the Pass amplifier. A brand new Bussman fuse, a Synergistic Research Blue fuse and a Synergistic Research Orange fuse. I keep this amp on 24/7 as suggested by the manufacturer. The Blue fuse has over a 1000 hours on it and the Orange had a 160 hours (continuous playing time) on it before any listening evaluations. The Bussman was listened to for the first time immediately out of the box.

The Bussman fuse did a fine job. But going from the Blue fuse which I had been using to the Bussman, there was a definite change. With the Bussman the sound was now more two dimensional. Instruments were not as full bodied. The depth of the soundstage was compressed front to back. I was more aware that I was listening to a recording versus being in the room with the musicians. The music was less emotionally involving. I did for completeness sake reverse the direction of the new Bussman fuse several times. It did consistently sound better installed in one direction, not huge but it is there.

Comparing the Synergistic Blue Fuse to Orange Fuse was similar to my past tube rolling experiences with my 300B tubed amplifier (but cheaper to carry out). Different tubes change the sound and these different fuses change the sound. Both of these fuses brought out more of the music that the Pass Labs amp was playing when compared to the Bussman fuse. Before any serious listening was undertaken, the fuses were evaluated for best sounding direction - and they both were directional.

The Orange fuse really is exceptional in it’s ability to let me enjoy the music and who is playing what. The detail of Willie Nelson’s nylon strings on his guitar had much better dynamics and richer texture than I have previously heard using the Blue fuse. His Stardust album continues to impress me.

When listening to music that has more musicians playing, such as on Sierra Una Noche, I can more easily distinguish each instrument and it’s contribution to the musical whole. Also in this live recording that uses only two mics, I get a better feel of each musician’s distance from the microphones and that they move toward and away from the microphones while playing. These factors allow me to forget I am listening to a recording of an event. With the Orange fuse, I feel I am at the event as it is playing.

This fuse experiment was fun to do and educational.
Feel free to call.

David Pritchard
575-644-1462

128x128davidpritchard
Boxer
What George is trying to explain is that the Lightspeed Attentuator is a passive product.
Hence no fuses as no mains ac is used.

The rest is just a little bit of extra vitriol for good measure.
I rang them to confirm fuse size they were extremely enthusiastic about both aftermarket fuses and wooden blocks underneath the amp.
If the fuse made the kind of differences you guys say they do here, they would be in the  Ayre EX 8  from the factory, being already at $6K. And as for the wood blocks 🤦‍♂️
They were just humoring you, they would have          themselves laughing after that phone call🤣, as they are technicians first and foremost, not snakes oiler's. 
Hence no fuses as no mains ac is used.
Wrong again, do your homework, yes it’s passive, yes it’s mains powered or can even be battery powered.
George.

Are you suggesting that Ayre do not sell their equipment cw Myrtle wood blocks?
Just peruse their website and go to the ex8.
Come back and tell me what you see.....

Oh and $6k is bare bones, fully loaded they are $8.5k.
Just for edification.

But alas I am afraid your increasingly irate posts are not on topic so could you please refrain from getting yourself all worked up and let us get back on point.
Thank you
Wrong again, do your homework, yes it’s passive, yes it’s mains powered or can even be battery powered.
My apologies George.
I wrongly assumed there would be no mains voltage involved in a passive device.
Thank you for enlightening me.