New Omega E Mat from Perfect Path Technologies


Many of you own or have read of the highly-regarded PPT Omega E Mat, one of Tim Mrock’s revolutionary signal-enhancing accessories. Just prior to his untimely passing, Tim had finished developing a new generation of his Omega mat, soon to be available. Krissy Mrock has asked a few of us to introduce this new mat, here given the working title of The Double Omega.

In distinguishing the Double Omega, we know the original Omega, herein called the single, as a 7.5” by 10”, rather heavy and somewhat pliable mat, a bit more than 1/8” thick and with a vinyl-like feel. One face is glossy white, displaying the PPT logo and Omega name, while the other is black, smooth and magnetized. Sandwiched between these faces is the active material that causes components to reject the EMI that saturates everything in our surroundings. The Double Omega is much the same, with one important difference: the magnetized face has the finely-textured feel of around, say, 220-grit sandpaper. This texture, it is presumed, comprises yet a second active layer of EMI rejection. Presumed—because working details of the Double Omega are not well understood—better yet to know how to apply it.

With the understanding that the single Omega E mats generate field effects from both faces, mats have typically been placed under and over components and vertically over circuit breakers. How you apply the Double Omega will depend on best use and experimentation. In my case, I have removed two single mats, lying side-by-side, from the top of my large Wadia CDP and have replaced those with two Double Omegas. The Wadia is a one-box player that contains a pre-amp, so I wanted that second, strong field effect exerting downward as well as upward. I also have several singles placed underneath, just as before. Going straight to amps, this player is my only source, so I want it fully protected from EMI. Your priorities will differ.

As of this writing, I am only thirty-hours in on placing these Double Omegas, and I can already tell you they are powerful in their prevention of EMI within my digital source. Yet another veil has been lifted—all instruments and voices are even more sorted out in the aural space with new information heard within that space. There is much more decay heard against a new silence behind and between the musicians. I am already so pleased and excited about what the Double Omega E mats are doing. As Krissy told me, Tim was really stoked to have these new mats available. Rather than wait for the the fourteen-day window of improvement, I want to get this intro out so others can relay their experiences sooner.


128x128jafreeman
I posted this about a year ago trying to explain how I think the PPT products work. Ethan don’t go nuts on me, I don’t claim to be a scientist or have objective measurements of the PPT products.  I’m just trying to add (hopefully productively) to the discussion.  

Spintronics (the direction electrons spin around the atom i.e. quantum physics), you want to get the electrons spinning as uniformly as possible in the signal passing through your components, cables and speakers....At some point, I’ll probably get more E-Cards and put them along my speaker cables and crossovers just to keep that spintronic effect uniform all the way to the drivers.

Just thought I'd share some interesting reading:

Spintronics

A conventional digital electronic system conveys a binary signal (think 1s and 0s) through pulses of electrons carried through a conductive wire. Spintronics can convey additional information via another characteristic of electrons, their spin direction (think up or down). Spin is related to magnetism. So spintronics uses magnetism to align electrons of a certain spin, or "inject" spin into a system.

If you've ever done the old science experiment of turning a nail into a magnet by repeatedly dragging a magnet along its length, then you've already dabbled in spintronics. The magnet transfers information to the nail. The trick is then transporting and manipulating that information, which requires devices and materials with finely tuned properties. Researchers are working toward the milestone of a spin transistor, a spintronics version of the electronic components found in practically all modern electronics. Such a device requires a semiconductor material in which a magnetic field can easily manipulate the direction of electrons' spin -- a property called spin-orbit coupling. 

https://www.sciencedaily.com/releases/2019/01/190110160941.htm

https://en.wikipedia.org/wiki/Spintronics

https://www.sciencedaily.com/releases/2015/05/150505082944.htm

https://phys.org/news/2018-05-graphene-layered-magnetic-materials-ultrathin.html


sbayne
Spintronics (the direction electrons spin around the atom i.e. quantum physics), you want to get the electrons spinning as uniformly as possible in the signal passing through your components, cables and speakers....At some point, I’ll probably get more E-Cards and put them along my speaker cables and crossovers just to keep that spintronic effect uniform all the way to the drivers.

>>>>The electrons spinning around the atoms are not the (free) electrons in the conductor, you know, the ones that hardly move. Also, the signal is not electrons, it’s photons.
Geoffkait this is what I was referring to as shown above:

”A conventional digital electronic system conveys a binary signal (think 1s and 0s) through pulses of electrons carried through a conductive wire. Spintronics can convey additional information via another characteristic of electrons, their spin direction (think up or down). Spin is related to magnetism. So spintronics uses magnetism to align electrons of a certain spin, or "inject" spin into a system.”

Also if Tim worked out a semi-conductor like material that can control the spin of the electron ie “spin-coupling” as discussed above and put that device in The Gate I can see why he would charge $5,000 for it and be discussing its use for industry and municipalities.