2. analog
  3. 150758-92835

Trans-Fi Terminator Tonearm: 2019 Update

In reading a few related posts on linear tracking tonearm, in general,  and Trans-Fi Terminator , in particular, I thought I would give a brief update of the Terminator.

I purchased the arm directly from Andrey in Moscow two months ago. From what I understand, Andrey has taken over production after Vic's retirement. What I received is the most up-to-date version of the arm with the carbon fibre wand and brass counterweights, the direct wire leads from cartridge to  phono amp, and a new brass manifold ( not evident from the main web-site). Both the wand and the new manifold are Andrey's contribution to the continued refinement of the Terminator.

Also,  please visit this site: https://darklanternforowen.wordpress.com/2017/04/15/terminator-tonearm-new-arm-mount/. This gentlemen from NZ has developed a new arm mount for the Terminator which advanced the arm's sonics even further. It was reading through the the development of this new arm mount that convinced me to order the Terminator after much prior research. I did not purchase the arm mount from NZ as it would not readily fit my Verdier La Platine, instead Andrey made a custom arm mount. It is in essence a two point support mount rather than a single point support rod that is commonly used. 

My previous arm was a SME V of 1990's vintage mounted with a ZYX airy. The Terminator is several notch above the SME V. All the accolades given to the Terminator seem justified. My main point in writing is that the new developments by Andrey, i.e. the carbon fibre wand and the newest brass manifold, seem to improve upon the Terminator even more ( see link above ). This is the news that I wanted to share with existing Terminator owners. I asked Andrey to start a blog on all the new stuff that is happening with the arm, but it seems that he is busy making 'things'!




ledoux1238
slaw's avatar
slaw
20,410 posts
 
I've enjoyed reading here. This tonearm has been on my short list for years and now, reading of the latest refinements, it's very tempting. My only drawback is my decades long ownership of the ET-2.5 that I've been loyal to and have future plans for with Bruce's latest refinements. I've spent years and treasure acquiring the necessary components ( high-end compressor, etc....) We'll see..............
ledoux1238 OP
276 posts
 
@slaw Finally, rumblings from across enemy lines! Hehe!

There are similarities between the Terminator and ET communities. It seems that we are buying into a ’project’ rather than a product per se. Tweeks, modification, experimentation....etc encouraged and assisted by the original designers seem the order of the day. Owners have invested much into the arms over the years, just like yourself.

Having said that, two main differences of the arms are the manifold and the wand. The inverted ’v’ shape slider and manifold requires constancy of air flow in one dimension, vertically. The tube and collar type requires 360 degree air flow constancy, a more difficult task. And the shorter arm wand of the Terminator reduces, in theory, resonances. Both differences allow the Terminator to work less against gravity. How that translate into superior sound quality, or not, is the question. It would be highly informative to hear from a long time ET owner about his/her thoughts on the Terminator. In fact, it would be fascinating.

After three months of use, there are two operational caveats of the Terminator. The manifold sits on top of the platter and does not slide aside like a Clearaudio arm. Placing records in and out will require some care. And the cartridge leads sometimes dangles the wand, causing the cartridge to skip. That will be avoided with more experience of use. But for now it still happens, albeit infrequently.

Please keep us posted if you do decide to switch.




parrotbee
103 posts
 
What’s the air pump you use like for noise?
ledoux1238 OP
276 posts
 
@parrotbee  I ordered the arm with  the Sera low pressure pump and surge tank. It’s placed in an adjoining closet as the hum is noticeable. However, the designer, Vic, placed the pump in a wooden enclosure next to his TT and stuffed it with insulating material. That seemed to work fine. 

I would say the noise from the pump is easily manageable. 
jtsnead's avatar
Ag insider logo xs@2x
jtsnead
217 posts
 
I was an early adopter of Vic's arm also loved the sound but ultimately got tired of messing with the pump etc., so I went back to pivoted and could not catch the sound I had before with multiple tables and arms. I got all the way up to the Triplanars top 10" arm and it was very close then I came across the Thales products and found a Simplicity II at a decent price and now I have the sound I remember albeit at more of cost vs the Terminator. Great news it is back in production.
More to discover