Only $800 to work with streamer/power for 3rd system


I am looking for a preferably one-box or potentially two-box solution that will provide the best sound quality to stream Tidal (ethernet or wireless can work) including MQA and power my existing passive speakers (plus powered sub).  This will be for my office system at work, where I have a solo office in a large building full of other tenants.  So no loud playing most of the time but want good quality, per limited budget.

Speakers will be NHT C1 bookshelf pair with Sunfire SDS8 mini sub.  These are already in house.  Hope to keep the streamer/power solution to $800 total, given the modest speakers.

Other considerations:  Really want 32-bit DAC and MQA capability.  Don't need much power.  Don't need storage or ability to control storage - just Tidal streaming, but want Tidal support natively built-in.  Don't want to use my phone or computer because already using them at work - want the streamer/power solution to handle.  On second thought I guess control app from phone is okay, just don't want to be bluetooth streaming from phone or computer.  Would prefer new, not used, but factory refurbished is okay with warranty.  Won't use other sources, just Tidal.  Don't want multi-channel AVR, only need stereo.

The two options I'm most focused on are Bluesound Powernode 2 or 2i, and the Integra DTM-7 stereo receiver, each of which are single-box solutions.  Other options could be PS Audio Sprout 100 integrated for $600 (or NAD, Marantz, other integrated similar cost?) with a separate streamer, but I'm not aware of a separate streamer for $200 that has a 32-bit DAC and handles MQA.  Yamaha WXAD-10 seemed close but best I can tell (not real clear) I think it has 24 bit DAC and anyway it'd push total closer to $1000 with Sprout.

I am familiar with the Integra DTM-7, as I have the DTM-7 as the HT hub of my current bedroom system, and with its HDMI/Dolby Vision/HDR support it is killer in that role for $650 for a 2-ch setup.  But for Tidal music the sound through the NHT C1's was a little bright and after couple hours slightly fatiguing for me, although doable if that's what I go with for 3rd system (I'd get another DTM-7 for office if that is way I go).  I've since upgraded my 2nd system speakers to Spendor SA1 and they sound great powered by the Integra in system 2, better combination - no more brightness/fatigue.

But now with the NHT C1 speakers freed up for system 3, I'm wondering if I can do better than the Integra for a music-only application for my office.  Has anyone compared sound quality of Bluesound Powernode 2 (or 2i) with the Integra?  Does Bluesound have a warmer sound?  FWIW I know the Integra is class A/B, and I think Bluesound is class D.  Oddly, I think Powernode 2 and 2i share same amplifier and DAC (but 2i includes some new features that I probably wouldn't use - Airplay, etc.), yet What Hifi review claims sound much improved with 2i.  Powersound 2 is $600 now, while 2i is $800.

Or am I overlooking a better solution?  Thank you
kren0006
It’s really nice. Im not good at describing sound qualities but the spacing of instruments seems better (more separation) if that makes sense compared to my Integra dtm7. To be honest I can’t hear mqa sound difference with the Integra even with the SA1’s, let alone the NHT’s. 

I havent played with the Teac filters yet so can’t speak to them. The Teac interface program not great but LUMIN program not bad. 

I run it in xlr balanced to Audio Research DSI200 to D7. 
Other than the color of the screen the Teac and Lumin apps are identical and both are written by Lumin.  They both work fine as does the NT-505.
Only negative thing I’ve noticed with nt-505 is maybe once every 5-7 hrs of playtime it will just exit (stop playing) for unknown reason. Sometimes it kicks back in, sometimes need power cycle.  Better since fw update but still happens every now and then
So back to original questions:

Does anything beat Bluesound Powernode 2i for $800 or less?

Powernode 2i at $800 better than Integra DTM-7 at $650?
I found the following review comparing the Onkyo to the Bluesound Node 2i.

I've been looking around for the last few months for a new streamer myself.  at the $800 price point, with your wish list, it's really hard to beat the Powernode 2i.  I only have two problems with it: support by email only and I wish it had some type of room correction.

I really like the NAD M10 streamer, but at $2500, it's more than three times the price of the PowerNode 2i. 

Full disclosure, I've never heard the Onkyo unit.

------------------------

The Onkyo TX-8250 is a basic, straightforward music streamer at an affordable price. No more, no less. It gives you all the features you'd expect, the ability to control them, and then gets out of the way. The lack of digital album art, Roon capability, and the like are reflected in the price. For the most part, the TX-8250 was just designed to get the job done.

The problem is, while it is a very solid streamer in its own right, and certainly a viable option, it pales in comparison to the excellent (and less expensive) Bluesound Node 2i. We struggle to imagine getting the basic Onkyo, with its average sound and dated design, over the exciting, dynamic Bluesound. We don't mean to shortchange Onkyo – their streamer does have features that the Bluesound doesn't, like a digital display, and there are some solid options for the price. But it's never going to be anything other than a reputable alternative to the more interesting models on this list.