Modded or stock Technics SL1200G


I have been using my modded 1200G for one year now. I am still delighted with my choice to buy and mod this TT. I had Ralph (atmasphere) build an armboard and install it, Tri Mai built and installed the  Triplanar Classic SE tonearm, I added the Oracle Hard Acrylic mat and a HRS 315 gram record weight. Brian Walsh of ttsetup mounted the Lyra Kleos cartridge for me.

Having only used Lyra cartridges since 1988, it came as no surprise to run it for 80+ hours for it to open up. Even though "Mickeys" review stated 50-100 hours for break-in of the TT, It did surprise me that around 85-90 hrs for the whole rig open up and settled down.

Has anyone been unhappy with the purchase of their Technics SL1200G ? I would guess that many have used it stock but wonder if others have done any mods to improve SQ and what mods did they do ?

Platter mats, record weights or clamps, re-wiring the stock tonearm or installing a different tonearm. Power cord was hard but I got that too.


nkonor
stereo5,

Happy that it was a false alarm with the cancer scare. Had a similar incident with an MRI. Had to go back in the tube for 2 hours. 1hr no dye, 1hr with dye. No Cancer. I am still hanging in. Medical Marijuana is helping me to use Less Opioids

I think many like you, are enjoying their SL1200Gs with little or no mods. A proper platter mat instead of the stock mat is good. Mat and weight combos are to the users preference. There are so many. Too many to try all combos. I tried 5 mats and 3 weights.

I agree with you,that with the Triplanar and Kleos, I might be at the TTs limit. I think that the Triplanar and my phono would have no problem with an even better cartridge but not my wallet. I have been thinking used cartridges for awhile. There is a builder of very High End TTs about an 1hour drive away, that offers used Low Hour cartridges once in awhile.

I have a Dynavector XXII mk2 on my Kuzma Stabi TT, 12" VTA arm. Took a chance on the Dynavector. Did not know the Dynavector sound. The Lyras are hyper-detailed and dynamic. The Dynavector, has the details, just not hyped-up. Good bass, Smooth and a bit warmer which these old ears are liking.



                                                                                                                  
I, too, have this tt modded by Ralph for a Triplanar U12 arm.  I have gone with a 5mm thick acrylic mat (no longer available "VSPM" design) sitting atop a 1.5mm silicone foam mat.  I am using a Stillpoints LPS weight, and a peripheral ring clamp that I made myself using a sandwich of two layers of stainless steel bonded to a middle layer of acrylic, all CNC'd to make the ring.  My rig does not sound as good to me without either the weight or the ring.

The whole sounds very transparent and delivers the musical goods in a way that I like.  I'm pretty satisfied with it where I am.  Between it and my Lampizator Pacific DAC I have two outstanding source options, and the biggest limitation I run into is the recording quality itself.  Great records or digital files sound very satisfying to me (OK, given the limitations of home reproduction vs. live - - neither can truly compare to hearing the MN Orchestra live, but on small ensemble works....).  Bad recordings have no place to hide, but they don't make me run, either.  I listen to plenty compromised recordings simply for the joy of the music.  It is just so nice when that joyful music marries with outstanding recording and pressing.
I have one also and I will say that my Triplanar VII SE sounded better on another table than the Technics, it seems like it was picking up some noise from the power supply so I would also upgrade to the timestep one if I wanted to keep the TP on this table
jbrrp I also use a funk firm mat I had to get the 3mm one because the 5mm one I had was too tall for the Triplanar, not alot of room to lower the arm on this table. I had to get a board from Greece and drill it myself because no one in the US wanted to make one without sending the whole table to them which I thought was kind of weird
jtsnead,

What TT did you have the Triplanar mounted on that sounded better ?? I have no noise intruding from the Technics TT. Could it be from another component in your system or poor ground ?

My system is dead quiet. First time in forever with any system that I've had since 1972. Always fought some hum, buzz, or just noise floor of the components.

I was a Spectral owner for 20 years. Fussy about setup and cabling. Also, does not play well with other components. Not anymore, since I changed to Pass Lab and XLR terminations. Both of my phonostages use RCA inputs but after that XLRs. Very happy not fighting for a noise free system anymore. Makes a difference, especially with low level detail.

If I change cartridges, I may need Ralph to make me a new armboard. Not a big hassle for me. I am maxed out with VTA adjustment, but do not fret about it. Due to my health issues, It is not something that I should do anyway.

If I remember right, you got an armboard from somewhere and did the mod yourself.

Have you mounted the Triplanar on the other TT rather than the Technics?