Cartridge Upgrade ...AT ART-9?


Hello all , I'm looking to upgrade to a better TT / cartridge and I've heard from a very reliable source that the AT ART-9 is unbeliebavly great cartridge.

I listen to mostly Classic Rock /Jazz Fusion ....I currently just have a Technics SL15 with a P205CMK3. I'd like to get something that is higher end around $1K that dramatically improves my setup. 

Anything that is with mentioning that gives the ART-9 a run in that range? Thanks! 

Allnic H1201 
Lyngdorf TDAI 2170
Tekton DI SE
128x128tommypenngotti
this is kind of off my original subject , but I tried switching inputs L/R on the RCAs of my SL15 to power amp & it seemed to clean up the distortion , I think The RCAs are going bad . These Technics cables are hard to find & not cheap , guess I could just use regular RCAs & ground wire to any screw on SL15 ....
Dear @harold-not-the-barrel : The OP 205MK3 are in operation condition but after so many time a change is in order due that the cartridge motor design is similar to the MK4 and any re-tipper only need to change cantilever/stylus with out repair anything else. Even with today boron/stylus will outperform the MK4 and probably its big broter EPC 100C MK4.

As a fact the 205 MK4 and 3 started in the market two years latter than the 100C MK4.b Were the latest MM Technics great designs.

All those are facts to help the OP but if he want to go for the Art 9 is fine with me or even with other MM/MI cartridges.

Other gentleman posted here that the OP needs a phono stage different from what he owns if he wants  LOMC cartridges. At the end it's up to the OP that's whom will " live " with his choices, not you or me.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
Raul, your post was meant to be some other as I never have talked ´bout Technics cartridges. I agree that ART7 may very well be even better than ART9 because it´s very low output 0.12 mV. But it needs a very HQ preamp to get the best out it. For OP it´s better to stay with ART9, first upgrade his deck, then cartridge. Besides, I doubt that ART7 is better than a vintage LOMC say Highphonic in that very low level 0.12 mV. 
Dear @harold-not-the-barrel : My mistake, never mind.

In the other side I still own Highphonic that's very low output a was designed by Denon ex-workers, these gentlemans participated in the Denon very low output cartridge designs and afetr that founded highphonic designing cartridges and a tonearm. Very good cartridges indeed.

The ART 7 is a good cartridge but its sound signature is different from the Highphonic.

R.