Opinions on Full-Range/single driver speakers


I am considering a DIY project to build a pair of single driver speakers. My current idea is to put Jordan JX9s into Transmission line cabinets. I am a competent woodworker and there are lots of plans on the internet.

I do really value the opinions of you audiogon members out there with lots of listening experience so I am curious what your opinions are on single driver speakers. If you can also comment on wide-baffle versus narrow baffle designs, that would be helpful.

My front end is a Monarchy tube DAC 25 with Matsushista tubes and DIP Classic, coupled to an AYRE DX7E, all interconnects and cables are DIY magnet wire. I am currently using Green Mountain Europa's and a modified Paradigm subwoofer.

After enjoying GMA's and experiencing time/phase coherent sound, I started looking at other options for coherent systems. It seems the simplest design is a good full range driver (no whiffle cone) in a TL or QWL cabinet.

So your opinions are appreciated. I would prefer if you did not advise me to purchase your favorite speaker as that is not the type of information I am seeking.

Thanks in advance for your time!

Drew.
drewh1
Correction:
It suppose to say AN Super Alnico 8" driver.
And again - fe206e and above mentioned do not sound the same .... - presentation wise.

Mariusz
Used fe206e in many designs inc front horns, built optimized cabinets designed just for all theses fullranges didnt just use 1 cabinet for all. Cabinet needs to be optimised or designed for ea driver no 1 cab design for all fullranges. Fostex fullranges better sounding than fe206e =f200a f120a fe166e fe167e fe207e fe208esigma fe168e sigma fe138esr. Do not see where fe206e is a deal. You can do better with fostex for less money. Or spend more and get a quality fullrange. But YMMV I know many dont get a chance to hear what these drivers can do when used proper. So fe206e since many say is a alright performer might be good enough for folks not able to get the chance to hear better fullrange or wideband transducers.
In our lab at The Galileo Company, we're not studying speakers, but people's perceptions of speakers. In this forum, I notice huge disagreements among honest, thoughtful people about how speakers sound. A good example: David Dicks, an experienced supplier of drivers and custom loudspeakers, says the fe206 is the best speaker Fostex makes (he sells Fostex and other drivers) In this forum, JohnK, an experienced supplier of custom loudspeakers, says the 206 is (perhaps) the worst speaker Fostex makes. He prefers the Fostex 200a. But Dicks says: "Two of these speakers have huge magnets and cast frames. They are very expensive. These are the FX200 and F200A. They do not go high enough in the treble to be truly satisfying. And the midrange is somewhat veiled, soft, and lacking in detail compared to the FE206E."

Since studying peoples' perceptions is my business, I'd be interested in your opinions on two questions:

1.) How is it that experienced, thoughtful, honest people can disagree so much about how the same loudspeakers sound?

2.) What does that say about the current state of loudspeaker design theory?

Listiac
Listiac - IMO, it may not be as much about the speaker as the system/room it is place in and the taste of the listener. Just today, a friend of mine was selling a certain speaker because they were too bass-heavy and muddy for his room and system. If asked, he would say he didn't like them because they lacked definition and clarity. I tried them in my room and system and they sounded thin and lacking in midbass - and I am by no means a bass freak. I'm talking about the proper resonance of the acoustic guitar body and such, as opposed to synth bass or whatever. So, if asked, I would describe the same speaker as "thin and lacking in midbass".

In reality, I think all opinions should be prefaced by "In my room, with my system and with the recordings I played, my opinion of this speaker is ..." However, audiophiles love to couch things in absolutes - this speaker has these flaws and that speaker has those flaws" You just can't do it that way.

And that's how it happens, IMO.
I think you should consider your source of information maybe some is biased to what 1 sells. Since I dont offer any of the drivers I suggested in my last post. Maybe bias to what 1 sells is the issue.