2. amps-preamps
  3. 139816-118117

My first Tube Amplifier

I have a 40 years of audio history starting with Garrard Turntable, Fisher Intergrated(SS), ADS bookself speaker on 1978.

But I started using tube amplifier on 1999.

Since then I had been using only tube amplifier in my main system.

My last SS main amplifier was Krell KSA 150 to drive Apogee Duetta Signature speakers.


http://www.jadis-electronics.com/photos/ja500/45/3/ja500.jpg

My first tube amplifier was Jadis 500 which comprised of 4 pieces weighing 120 lb each.

B&W 801 driven by Jadis 500 gave most deep and powerful bass at my home.

But it generated too much heat so it was hard to use during summer.

It was memorable experience to use it for 4 years.

I may not go back to such monster tube amplifier again.



How about you?

What is your first tube amplifier?



I bet two cents on no one had used larger one as the first tube amplifier than mine.


128x128shkong78
shkong78's avatar
shkong78 OP
1,463 posts
 
Tube rolling with Nos tubes is fun.

If you want to get the best out of your tube amp, then you shall do tube rolling.

I order Nos tube from Ebay dealers who offer unconditional return.
bighempin's avatar
bighempin
30 posts
 
What a great thread, thank you for the question! I am currently researching and shopping for my first hifi setup and I'm leaning towards tube amps over SS just based off of my research, so this has been a very helpful read through!
dkretzer
7 posts
 
My first stereo tube amp was a Dynaco ST 70 I bought in 1968 when it was almost new. I still have it. Has been lightly upgraded but retains its original charms. Sounded best with Spendor BC IIs that I regrettably sold. Keeping it alive with an FM3 and KLH 17s. 

Currently listening to a C-J Premier 11A that I picked up earlier this year in my main system. Fantastic amp but the Dyna is heavenly.
aquaticdoc's avatar
aquaticdoc
15 posts
 
Great to see the number of Dynaco initiates, perhaps not the original kit builders, but certainly among the best second generation advocates. I started with a kit-built Eico in the early 60's, then a Heathkit, then upgraded to Dyna, PAS-3x and ST-70, and still have two PAS-3x preamps with upgraded tubes, one factory built bought cheap. I lived in that Dyna world until building Welbourne Laurel Iix Ultimate 330B mono blocks which I still have, driven by a new AI Modulus 3B, recently received. Love the glow of the 300B tubes and have rolled a series, currently blue Sophia Classics. Will perhaps experiment with the planned newly built Western Electrics, but I'd like loads more input before dropping that many dimes. 
tastyfreeze's avatar
tastyfreeze
135 posts
 
Magnavox???  GE?? Big W?Smelly old units with paper, cloth, & wax parts!
More to discover