2. misc-audio
  3. 136402-109580

Hear the sound or listen to the music

Over the years I have tried to feel the music in changing things in my stereo system. Last thing I have discovered was Bybee products name QSE and the new one iQSE. I try them cause the investment worth it and there was a 30 days trials. First I try the iQSE under the power distribution bar, with very good result. But the iQSE is suppose to be install inside the cover of a CD player for exemple, using the magnet included, so I move it inside my CD player. I order one more, but this time, it was a QSE a little larger device, to be install under or over a component, I install it under my power amp. The music is well separated from left to right, but also back and forth. Also there are much more micro informations, that is discovered in my CD collection. It takes about 2 days to settle down, you may try other positions in your system, all systems are different and react differently. If somebody have experiment such improvement with ByBee QSE and iQSE let me know.


audiosens
iasi
115 posts
 
A friend of mine asked me to evaluate the iQSE in my system. He gave me 4 of them and I placed them inside my CD player, and on top of my power conditioner.....ZERO effect...i have an advanced degree in quantum physics and I will not comment on the mambo-jumbo explanations from Bybee site, but what i can comment on is that these 'gizmos' didn't have any impact on the quality of the sound...did blind testing with 2 of my audiophile friends and none of us could discern any positive or negative influence on the music...
That being said, if others believe that they hear a difference, by all means, let them buy...:)
audiosens OP
235 posts
 
iasi
It depend of many factors, electricty quality, and the stereo sound system...   A friend also had try, but have had different  impact according to his components... But he keeps 2 of them instaledl in his system...
sgordon1
407 posts
 
I like and use both versions.  Happiest with suspending
a QSE with string so that it rests above the area where
cds play in my machine.  This way, I have the advantage of
its magnetic influence without the consequences of the QSE
coming in contact with the player (which affects the sound
in a different way).  In other applications, the contact is fine, too,
like on top of the ends of power cords, interconnects, and speaker
cables.

Also, try the QSE under a piece of electronics.  And, try resting a
cd on a QSE (switching sides after 15 seconds) before playing it.
Can you hear a difference, this way?  I also use a Walker
Talisman before every single play...
iasi
115 posts
 
i think i'll cut one in small pieces and swallow them...this way i'll be energized at all times...:)
audiosens OP
235 posts
 
sgordon1
Thank you for your experimentations, yes I also noticed improvement under power bar and under power amp.  After  a few months, I have the chance to try 2 other QSE, and I had tried them on the electrical panel cover.  I had taped them with electrica tape, one at the bottom where the main electrical input, and where my dedicated AC stereo wire come out.  And the other at he top of the electrical pamel cover.  It improved specialy the component that did not have a QSE yet.  So these two add a general electrical treatment to all my system.  As you had mentioned with the CD treatment, probably it probably relates to magnetism ?
More to discover