New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
More on electrical contacts from our good friend Wikipedia.

https://en.m.wikipedia.org/wiki/Electrical_contacts

Excerpt:

Electrical contact theory Edit

Ragnar Holm contributed greatly to electrical contact theory and application.[10]

Macroscopically smooth and clean surfaces are microscopically rough and, in air, contaminated with oxides, adsorbed water vapor, and atmospheric contaminants. When two metal electrical contacts touch, the actual metal-to-metal contact area is small compared to the total contact-to-contact area physically touching. In electrical contact theory, the relatively small area where electrical current flows between two contacts is called the a-spot where "a" stands for asperity. If the small a-spot is treated as a circular area and the resistivity of the metal is homogeneous, then the current and voltage in the metal conductor has spherical symmetry and a simple calculation can relate the size of the a-spot to the resistance of the electrical contact interface. If there is metal-to-metal contact between electrical contacts, then the electrical contact resistance (as opposed to the bulk resistance of the contact metal) is mostly due to constriction of the current through a very small area, the a-spot. Contact force or pressure increases the size of the a-spot which decreases the constriction resistance and the electrical contact resistance.[11] When the size of contacting asperities becomes larger than the mean free path of electrons, Holm-type contacts become the dominant transport mechanism, resulting in a relative low contact resistance.[12]


How does Caig DeoxIT Gold work?

from Caig web site,

“To avoid detouring into a discussion in physics, simply stated, electrons travel from one side of a thin film of DeoxIT® Gold to the other without passing through (this is the same effect that gave the tunnel diode its name). DeoxIT® Gold fills the gaps in the contact surfaces, increasing the surface area and current flow (conductivi- ty). DeoxIT® Gold penetrates the plated surface and molecularly bonds to the base metal to seal and protect it (see FIGURE 1). Unlike other products, DeoxIT® Gold provides long-lasting protection and will not gum-up, evaporate, varnish, char or breakdown.”

and,

DeoxIT® GOLD is effective on stationary and moving contacts and connectors with similar or dissimilar metals. When a treated and untreated connector mate, DeoxIT® GOLD migrates to coat both surfaces. When connectors separate, DeoxIT® GOLD recoats both exposed metal surfaces (see FIGURE 7).

DeoxIT® GOLD's unique formula contains conditioners, deoxidizers, preservatives, conductivity enhancers, arcing & RFI inhibitors and anti-tarnishing compounds.
Before we get carried away by the wondrous qualities of various contact enhancers etc please bear in mind the size of the electrical tracks on circuit boards, coil wires inside loudspeakers crossovers and cartridges etc.

Somehow, miraculously the signal still gets through. Even 50 year old wires.

Amazing isn't it?

(Another post headed towards deletion methinks).


Jafreeman
Mad Scientist does have a sense of humor. Like I said it’s all hocus locus to me. Even if they explained how it works I probably wouldn’t understand it anyways. Besides every manufacture has an explanation why their product is the best. I let my ears and heart do the explanation. Also appreciate the free sample and gurantee.
cd318 wrote,

“Before we get carried away by the wondrous qualities of various contact enhancers etc please bear in mind the size of the electrical tracks on circuit boards, coil wires inside loudspeakers crossovers and cartridges etc.

Somehow, miraculously the signal still gets through. Even 50 year old wires.

Amazing isn’t it?

(Another post headed towards deletion methinks).”

>>>>Actually when you say “the signal still gets through,” that’s not completely accurate. What gets through is a combination of signal, noise and distortion. As enthusiasts we try to maximize signal and minimize noise and distortion. There is no substitute for signal over noise plus distortion ratio. That’s why we use contact cleaners and enhancers, to help accomplish that. Of course you guys are free to do whatever. It’s no skin off our noses.

”No matter how much you have in the end you would have had even more if you had started out with more in the beginning.” - Old audiophile proverb