Theory behind well tempered tonearm?


Hello Goners.
I am curious on the Well Temperd tonearm alignments.
In the normal pivotal tonearm, the S2P distance is fixed, and follow is the offset angle at where the cartridge is fixed to reduce the most distortion when we mount the cartridge correctly by using the appropriate protractor.
Now comes the Well Temperd, the pivot is the ball half sunk in oil and hung by the strings. That means the P2S distance is not fixed. Offset angle is fixed (because the cartridge is mounted on the headshell). So, distortions are almost appeared everywhere. Why Well Temperd owners never complain about it. All I have read online are the sound is smooth and accurate.
Why so?
dangcaonguyen
@dangcaonguyen - don’t remember what tools came with the table, at that time, I was having help on turntable set up, particularly once I moved up in the cartridge world-- I had set up plenty of turntables in the early ’70s, but the Well-Tempered required someone familiar with it, and I got to the point where I was using fairly expensive cartridges (e.g. Lyra Parnassus was the last one on that table, I think), so can’t tell you more. Sorry. I was friendly with the fellow who was the US distributor for long while, but times change. Really haven’t kept up with the turntable or the company. At the time the arm and table were introduced, his work was considered ingenious, and it wasn’t crazy money.
Sorry I can’t provide more info. It’s been quite a while.
Thanks @whart 
I appreciate your response. Now I know for sure that the arm, cartridge still need to setup correctly to achieve the best performance. (Not just flush mounting like my friend suggested)
@dangcaonguyen - why not contact Well Tempered? Or a dealer within your locale that handles the table and provide further info?
Dang, You are right to wonder about the WT tonearm.  It is said to have no bearing and hence zero bearing friction.  But of course, it DOES have a bearing in the strict definition of the term; otherwise it could not pivot.  As you mentioned, the "bearing" is essentially a golf ball suspended in lots of goop.  In fairness, the well that confines the damping fluid affords only a very little tolerance for the golf ball to "wiggle", but without measuring it, I would guess that the tolerance exceeds that for any decent quality tonearm with captured bearings.  For me, the consequence of the design that irks me is my observation that the azimuth setting is not stable as the tonearm traverses the LP surface.  In addition, as you note, the headshell holes are not slotted, so the distance between the mounting holes in the cartridge body and the stylus tip had better be the standard value (which I don't recall), else the cartridge will be a bit out of line with whatever geometry WT had in mind. One reason why the tonearm can sound "good" to many people, in my opinion, is the heavy damping of tonearm motion in all directions, which may mask imperfect control of the cartridge body.  The extensive damping makes most LPs sound alike, in my experience.  All "good"; none "great" or exceptional.

All of the above observations are relevant to the WT Reference tonearm that was introduced in the 90s.  I heard it many times, mounted on a WT Reference TT, over a period of more than 10 years in the system of a close friend who owned a fine audio system.  The latest iterations of the WT tonearm, such as the one used on the Amadeus, may be free of most or all of the perceived issues. For sure, the Amadeus has many fans.
@whart 
Thanks, but it is not my turntable. I just curious about the Well Temperd tonearm geometry, but I will do some research.
@lewm 
Yes, I have been thinking the same thing. What my friend listening is not the best the cartridge can bring to the performance. Since the arm is heavy damp, it is masking both the good and bad. But I will do some more research.
Thank you all.