Help appreciated: Martin Logan Statement E2


I just purchased the last demo pair of Martin Logan Statement E2 and am building a dedicated listening room with the help of Rives Audio. Need your help and advice as I need to now select the best match for amps and preamps for this system. These speakers are notoriously inefficient and I have seen a 1000 watt amp (into 8 ohms) clip driving the front panels. I play music quite loud (concert levels) and have a large room (19ft x 24ft x 13ft (height)) and therefore need a lot of amplification. However, I still covet the refinement, not just power: sweet midrange, extended treble, holographic imaging (as much as possible with an electrostatic), etc. So the amps that I am considering for the front panels would be the McIntosh 2kcW (2000 watt monoblock), Krell Evo Ones (2 sets for the front panel), Pass Lab 1000.5, Audio Research Ref 600, and VTLs.

I listen to everything from female jazz vocals to rock, to classical, to pop music so it is hard to generalize my musical preferences. I also own a set of Pipedreams driven by VAC equipment in another setup in my other home and also have the top of the line MBL system as well in my living room -- however, I do not have a lot of experience with electrostats. I realize that the Statements will be a compromise as it does not have the "slam" of cone speaker and the dynamic range and does have integration issues with the main panel and the midbass and the subs -- but there is magic with regards to the speed, the midrange and the treble of these speakers especially on female jazz vocals that I am willing to take the compromise. In advance, thank you for your advice.
cchp
The McIntosh 2kW specs suggest there are three output levels: 2, 4, and 8 ohms. I have never thought about the best way to deal with amp/speaker combos where the impedance range spans several taps on the amp. I have never heard these amps; I am sure they are nice with the right speakers (they'd better be for that price/weight/heat-point). Given the money it appears you are willing to spend, if you are going new, I would imagine any dealer will allow you to do a home demo. If not going new, I would try to borrow a solid state McIntosh somewhere else.

Personally, given what you stated you are looking for out of these speakers, I would expect that tubes would do you better anyway.

Please forgive the ugly link in the previous post. The Atma-sphere white papers are here.
I heard the ML Statements at a dealer with the big boulder amps. They cost about 100 K and were stunning. So if money is no object-
I would definitely try the Berning Quadrature Z Mono blocks. I've personally used numerous ZH270 combinations in the past with Soundlabs and the results were outstanding. The lightning fast yet musical character of the Berning designs compliment electrostatics perfectly. Also, the Berning designs are legendary for being very robust and stable under all loads. Tube life on these amps is very long as well.
Starcon,

I have heard the Boulders although not w the MLs but I am sure they would be stunning. A little bit more than I want to spend but great suggestion