New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
For folks asking a lotta questions, good on ya mates!, but you guys should really do some due diligence beforehand. You might not appear to be so out of it. You know, Google is your friend. I know what you’re thinking, sob, but I haven’t run across Graphene applications anywhere. 😳 In certain areas of science, audiophiles lead the way. Lead, follow or get out of the way.

5 seconds after a Google inquiry by your friend and humble scribe, the first hit is,

“Potential graphene applications include lightweight, thin, flexible, yet durable display screens, electric/photonics circuits, solar cells, and various medical, chemical and industrial processes enhanced or enabled by the use of new graphene materials.[1]

In 2008, graphene produced by exfoliation was one of the most expensive materials on Earth, with a sample the area of a cross section of a human hair costing more than $1,000 as of April 2008 (about $100,000,000/cm2).[2] Since then, exfoliation procedures have been scaled up, and now companies sell graphene in large quantities.[3] The price of epitaxial graphene on Silicon carbide is dominated by the substrate price, which was approximately $100/cm2 as of 2009. Hong and his team in South Korea pioneered the synthesis of large-scale graphene films using chemical vapour deposition (CVD) on thin nickel layers, which triggered research on practical applications,[4] with wafer sizes up to 30 inches (760 mm) reported.[5] By 2017, graphene electronics were being manufactured in a commercial fab on a 200 mm line.[6]

In 2013, the European Union made a €1 billion grant to be used for research into potential graphene applications.[7] In 2013 the Graphene Flagship consortium formed, including Chalmers University of Technology and seven other European universities and research centers, along with Nokia.[8]”
USA may be out to lunch on R/D..China just pledged 2 trillion on artificial intelligence R/D research and plant construction. Tom
^^^
Keep the faith, Tom.

Going right along with the great economist Adam Smith, the invisible hand of the free market is already driving prices down. Randy-11 is going to supply us with a whole list of manufactures who are offering graphene contact products intended for audio at only ten bucks a pop.

Randy-11 sez:  " where are the listening tests showing it is better than the products that cost $10????"

Randy? Where's the list? Inquiring minds want to know.  

Frank
Graphene batteries for iPad or whatever. Buy ‘em all day long on eBay and Amazon. Hel-loo! 😛 All you can eat, baby! 


Turnigy Graphene batteries are the new standard for serious hobbyists who require POWER ON DEMAND.

Specs:
Capacity: 1800mAh
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 65C Constant / 130C Burst
Weight: 240g (including wire, plug & case)
Dimensions: 107x36x34mm
Balance Plug: JST-XH
Discharge Plug: XT-60

Note: Graphene LiPo Batteries only require a standard Lipo battery charger.

Advantages over traditional Lipo batteries.
• Power density: 0.15-0.17kw/kg (5Ah-16Ah)
• Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).
• Stable High pack voltage through duration of use.
• High discharge rate, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, packs stay much cooler under extreme conditions
• Higher capacity during heavy discharge.
• Maintains higher pack capacity even after hundreds of cycles
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life 600+
GRAPHENE FOR EMI SHIELDING (Duh!)

“Graphene appears to be the most effective material for EMI shielding
(Nanowerk Spotlight) Sensitive electronic devices like cell phones and computers require shielding from electromagnetic interference (EMI). Such shielding – which must be electrically conductive – has traditionally been made of metal, which poses a weight problem in the push to miniaturize and lighten electronics.

Previous research has already demonstrated that ultra-lightweight carbon nanostructure-based nanocomposite materials outperform conventional metal shielding due to their light weight, resistance to corrosion, flexibility, and processing advantages ("Towards cost-efficient EMI shielding materials using carbon nanostructure-based nanocomposites").

In new work, scientists in Korea have now demonstrated that single-layer graphene is an excellent choice of material for high-performance EMI shielding. They found that CVD-synthesized graphene shows more than seven times greater EMI shielding effectiveness (in terms of dB) than gold film of the same thickness.

Reporting their findings in a recent online edition of Nanotechnology ("Electromagnetic interference shielding effectiveness of monolayer graphene"), a team led by Byung Jin Cho, a professor in the Department of Electrical Engineering at the Korea Advanced Institute of Science and Technology (KAIST), suggests the feasibility of manufacturing an ultrathin, transparent, weightless, and flexible EMI shield by a single or a few atomic layers of graphene.”