2. speakers
  3. 131715-55045

Shahinian Obelisk vs VandersteenTreo

HI fellow ’goners.
I own the Shahinians, thinking of upgrading to the Treos. The Obelisks sound a little smallish for the room... And the room is not square, it's a big living area of a house, with access to the second floor's roof. 
Will this be an upgrade or just a sideward move?
Room approx 60m2, driven by Musical Fidelity A5.5, 250wpc at 8Ohm (thinking of replacing this one too).
Mostly jazz and acoustic music, less frequently - classical and pop.
Thanks!

ja_zz
ja_zz OP
124 posts
 
Bob,
What I want to know is how much tilt does it usually require to correctly position the speakers.
Hence the question.
And yes, there is thread both in the front holes (cones) and in the back (Spike).

gdnrbob
4,409 posts
 
As far as length of bolt is concerned, it depends on how un-level your floors are. In my 100 year old house, things are definitely out of plumb. Thankfully, I didn't need to alter the spikes, so I doubt you will.
If I recall, the spikes have about 1.5-1.75 inches of thread exposed before the spike.
B
tomic601's avatar
tomic601
12,754 posts
 
the tilt can be found from the manual !!!!!

which you can down load from the Vandersteen website

for free

you need to follow isoquant lines depending on two important variables: distance from acoustic center of speaker and height of your ears in the listening position

those will tell you how many washers to put under each cone


ja_zz OP
124 posts
 
Tom,
Ok, I guess you are right.  Will check the manual tomorrow.  For free. 
Meanwhile Merry Christmas to you all! ;-)
gdnrbob
4,409 posts
 
@ja_zz 
Those pics don't show any thread.
I would hesitate to thread your spikes into wood.
+1 Tomic
B
More to discover