Amps for KEF Blade 2


I am looking for advice from owners or dealers of the KEF Blade 2 loudspeakers. I am concerned my current pair of amps will not be sufficient for the B2s because of an article written about the original Blades published on July 5, 2013 in The Absolute Sound:

"The Blades have a nasty kick in their crossover that will suck an amplifier dry quicker than a student downing free tequila shots ... Just don’t be tempted to cheapskate on the driving amps, or you’ll live to regret it. Tube amps at least have an output transformer to hide behind, but when the Blades suck out a solid-state design, they celebrate by spotlighting their tweeter something chronic. To give you some idea of the lengths required, the otherwise excellent Rowland 625 [550 watts into 4 Ohms] wasn’t up to the job, it taking a pair of the 725 monoblocs [650 watts into 4 Ohms] to restore order. "

Are the Blade 2s just as demanding as the original Blades in terms of amplification? I would guess not due to the smaller 6.5 inch woofers, but this is just an uneducated guess. I own a pair of Benchmark AHB2 amps, which according to the manufacturer produce “a little over 500 watts into 4 Ohms”. Will this be enough?
e91811
Fantastic together. I have been on the audiophile merry go round for more than 25 years. I use a Mac mini into a PS Audio DirectStream DAC directly into the amps. I’m done. This is my “forever system”. Good luck to all of you and merry Christmas!
e91811,
Thanks for the feedback. I will have to do the home demo with the Benchmark amps. I was also thinking of the PS Audio DS or the Briscati M12 (soon to include ROON via ethernet).

dbphd,
I think the Ayre maybe a little weak for the Blades from what I have read about the Blades.The JC1 is a popular amp for the Blades. I heard the Hegel 360 integrated with the Blades and it can drive it well. Another alternative amp, and 1 I am considering along with the Benchmark, is the Theta Prometheus. A fellow A’Goner sent me an email indicating that it was a phenomenal combo with the Blades. A well known KEF rep came to his house and said it was one of the best Blade + amp combos he had ever heard. I won’t get into details of the email since it was a private message. The Theta measures similar to the Benchmark but 2x the cost..

I also have the KEF LS50 and I am amazed at how good it now sounds with my new integrated, a PeachTree Nova 150 ($1500). My prior amp, a Parasound A23, never sounded this good with the LS50,



yysantabarbara,

I was disappointed with the Parasound A23 driving the LS50s, but the A21sounded very good.

I replaced a Proceed HAP 2 with JC 1 monoblocks to drive KEF Reference 107/2s.  The improvement in sound wasn't subtle.  The JC 1s really made the 107/2s sing.

Without too much trouble I could try the Ayre KX-5 Twenty preamp with the JC 1s and 107/2s, and it's something I should do.  OTOH, perhaps I should just keep my beloved 107/2s and forget the Blade 2s.

db
dbphd,
I only noticed today that you had asked me about whether I had the Blades in a previous post. Sorry for not responding. I do not own them yet but today I have the money to buy them (worked a 2nd job for them). So some time in 2018 I will buy them.

I am actually now going for the Blades for my office because I have a new baby (who is very active at 19 months) and I am seeing that the living room could be problematic. Another poster on A’Gon related that he was able to get the Blades to sound good in a 14 x 13 room so that gives me hope for the office.

Just as an FYI, I have a few choices in electronics to figure out from the following list:

1) [PS Audio DS DAC or Mola Mola Tambaqui DAC] + MD 102 Analog Tuner + new Luxman 509x integrated. Not sure if it has enough power, but most reviewers state that Luxman underreports the power specs. I we see soon enough.

2) Briscati M12 (DAC + analog volume) + MD 102 Analog Tuner + [Theta Prometheus or Benchmark AHB2 or Luxman m900u or Briscati M15]

3) Mola Mola Tambaqui DAC (cannot use my MD 102 tuner here) + [Theta Prometheus or Benchmark AHB2 or Luxman m900u or Briscati M15]. Sell the tuner and listen to my beloved KRCW via internet.

I had a large list of high end integrated’s I was looking at but I am starting to see that there are a few really high quality DACs with good volume control or preamps with built in DACs.

Guys as a Blade dealer having both the JC 1, Electrcompaniet, Chord and T+A electronics on the Blades.

Here is our take, the JC 1 were okay amplifiers, not magical and not worth the hype, the Electrcompaniet AW 400 were fantastic and dramatically outperformed the Parasounds, the AW 400 also came down in price to $12k vs the nearly $10k price for the JC1.

A pair of Chord SPM 650 monos were a bit better, and the $32k Chord SPM 1400 were amazing.

We lost the Chord line due to not enough sales, brought in the T+A electronics and quite frankly outperformed the Chord stuff.

We have used the big T+A amp and preamp with the Blades and the sound is amazing! Huge soundstage, fast, tight bass, warm midrange, fantastic stuff.

If you are on the East Coast come in for a listen. 

Dave and Troy
Audio Doctor NJ