Tekton Impact Monitors


Hi All,
I'm relatively new to Audiogon but have trolled the discussions for a few months. I have been listening to Spendor LS3/5As driven by a Quad 34/306 combination since the late 1980's and decided that it was finally time to upgrade my speakers. I love the Spendors but they are very limited in dynamics and scale. I auditioned the SVS Ultra Bookshelf speakers and while they brought some additional scale they simply didn't have the sweet midrange that I can't live without. I listened to some open baffle speakers (Emerald Physics) and loved them, but their size and need for space worried me, and I found them less satisfying at moderate and low volumes, where I do a fair bit of listening. I was fascinated by all the discussion regarding Tekton speakers and was considering getting a pair of Enzo 2.7s, but after a short discussion with Eric I followed his recommendation of the Impact Monitor with upgrade. They have the 7 tweeter array and a pair of 6.5" woofers and are rear-ported. I use a pair of SVS subs (the sealed variety). The Impact Monitors are simply amazing. The midrange is oh-so-sweet (very similar to my Spendors, but with more air) and the detail, even at low and moderate listening levels, is superb. The imaging is even better than my Spendors managed and the scale is huge and is much more music-appropriate. My system is really quite modest but now when I walk into my listening room (doubles as our living room - thankfully my wife appreciates Hi-Fi) I get the audio-show feeling of "being there". I have a Denon DP59L turntable with a DL110 HO moving coil cartridge running through an Emotiva XPS-1 phono preamp and the Tektons are absolutely incredible with classic rock on vinyl. I'm not sure how Eric managed it, but these speakers are superb, even with my 30 year old Quad electronics. I believe they are basically the top 24" of the Double Impacts, but are rear-ported rather than front ported. I can heartily recommend them and Eric and his team are great to work with. I'm not sure how many other Impact Monitors are out there since the pair I have are S/N 0005 and 0006!  
ky1mag
kdude66 & ky1mag,
I checked with my flashlight, and the tweeter is indeed the SB Acoustics
26STCN-C0004. With this talk of a Scanspeak driver upgrade on the DI,
I wonder if he’ll be doing the same with the Impact Monitors and offer an
SE version?

pawsman
ky1mag,

I wouldn't worry about one bit if I were you,
You gave them a honest shot and found them to be not your cup of Tea,so to speak.

I recall myself a few years back just hating one of the most popular phono cartridges that everyone else just loved.

Kenny.
danoroo,
I use 24" Sanus stands with the IM, but the top plate was too small, so
I cut a 9" x 12" piece of 3/4" white pine, painted it gloss black and screwed it to the top plate. It works fine, the middle tweeter is right at ear level-

pawsman
Thanks for the info pawsman but I opted for the Enzo 2.7s instead.  They should ship any day now.  I'm glad you're enjoying the IMs.
Just wanted to comment that I am appreciating the continued dialogue.  I am pretty close to getting them and I can always return if they don't work out.