2. cables
  3. 1335297906

High Fidelity Cables CT-1designed by Rick Schultz

In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
knghifi
1,668 posts
 
I have two dedicated 20 amp circuits with 10g romex and PS Audio Power Ports ( SR Black duplexes coming soon) into my listening room but I'm currently only using one of the circuits.
If using multiple dedicated lines, tie the grounds together at the distribution box or power distributor/conditioner.

I have 2 dedicated 20 amp line.   Recently had IECs and OUTLETs on my Weizhi PRS-6s replaced with Furutech NCFs. As expected, the sound is more organic, lower noise floor ... very happy with the results.

Also suggested to me was to add a ground post to each Weizhi. The most remarkable improvement is tying the Weizhis together with a ground cable. It removed layers and layers of veil. Passages that were once congested and muffled are now crystal clear. Sound is more 3D, airy, tighter imaging, resolving, vivid ... I can crank up the volume several notches without any harshness.

All my audiophile level recordings always sound great but with compressed only music, Eagles, Springsteen, Santana, Heart ... they never sounded better and at higher volume level. If you told me all the harshness is mainly from noise, I wouldn't believe it.
knghifi
1,668 posts
 
SR Black duplexes coming soon
I suggest including, Furutech GTX NCF + NCF Cover + Wall Frame on the list of duplexes.   ZenWaveAudio was having a package deal so contact them if interested.  GL!
mac48025's avatar
mac48025
672 posts
 
knghifi, you ran a separate ground just from your conditioner or for the entire dedicated circuits? When I asked my electrician to run a seperate ground for my dedicated lines he said it would be a waste of time since it would end up sharing the ground with the rest of the electrical service anyways. I’m no electrician so I have no idea. Would I disconnect the ground from my dedicated lines at the electrical service and run a new ground to an independent ground rod on the other side of the house from the ground rod for my main electrical system? Might be a question for almarg.

I’ll check out the Furutech stuff. Thanks
knghifi
1,668 posts
 
I tied the ground at the Weizhis.   There're lots of good info on WBF forum.
68pete
994 posts
 
Hello mac48025
I have used the MC O5s with PSaudio P10 and for me plugging the MC O5s into the open plugs on the back of the  P10 did not give me great results as plugging them into the same wall socket the P10 was plugged into. I have since them taken my P10 out of the loop and went with the MC 6 Hemisphere. Which after a very long break in gave a much wider soundstage and more detailed across the board. I now have a total of 28 MC O5s in my system. 13 on my dedicated 20 amp line for my amp. And 13 on the line that feeds the Hemisphere with 2 plugged into the open sockets of the Hemisphere. Each time i add a MC O5 to my system the change is for the better.
Enjoy Pete

More to discover