12" Tonearms for TD-124


Finally having my TD-124 Mk ii
re-habbed as well as having a slate plinth made to accommodate both 9" and 12" arms. I'll be using my 3009 Series II and need to choose a 12" arm.

The 3009 will generally have MM carts mounted to it (V-15 iii, Jico MM-1, AT 155LC). For now, on the 12" arm I'm planning on using a DL-103r and eventually some type of Mono cart.

The Schick seems like a good choice mechanically and aesthetically so I'm currently leaning in this direction.

For some, either the SME 3012 or M2-12R might seem like an obvious choice. Have also considered the Jelco. No experience with any of the Ortofon arms.

Any insights or suggestions?


butch1970
I’m currently going through the same dilemma regarding arms for a rebuilt Lenco and would welcome any feedback. I like the sliding base on the SME arms as it makes setup a breeze. Oddly, internet searches don’t turn up very much info on the M2-12R, either positive or negative. The Schick arm seems to be a very popular choice among idler TT owners, which I take as an indirect recommendation. I haven’t been in a position to hear either of these arms unfortunately.

A couple of other interesting and reasonably priced 12" arms in current production, that would have sufficient mass for the DL103R, are the Univector, a unipivot from Australia (goldenageaudio.com.au) and the Elementum from New Zealand (analoginstruments.co.nz). I’ve not heard these either but I’m hoping to be able to soon.
Honestly i think Schick is the most ellegant minimalistic oldschool style tonearm of today. In the tradition of vintage ortofon It deserve design awards imho. The way it fits any vintage turntable and the way it looks is so nice. Often seen on Garrard 301, Thorens, EMT and Technics. German build quality and precise new bearings. Cable upgrade is optional, but i think with oldschool cartridges it's not necessary. I wish i could use Schick as a second arm, but my current plinth is not designed for two arms. 
I wonder how the Schick performs on regular modern cartridges like the Lyra and Ortofons (non-SPU). Do they only work with the likes of 103 and SPU ?
I have been using the SME M2-12. Previously I had used the 3012 S2 (not 3012R). The M2-12 is a much more superior tonearm compared to the regular 3012. The M2-12 has a much higher dynamic range and resolution. It actually mates rightfully with the new age modern cartridges without limiting their performance. The 3012 always had a vintage sound whichever cart you put in, somewhat veiled, slow and lack in inner detail. Where the 3012 excel is in the way music flows, that flow is terrific and is a reference for any tonearm to compare. Just like the flow of vintage turntables this tonearm also has that magic. In the end though it is not a candidate to be used in a high resolution setup, while the Schick and M2-12/12R do not have that limitation.

I would love to hear the 3012R some day.
Looks like we are on the same path. I was fortunate enough to find a NOS TD 124 MkII and I also found a NOS 3009 Series II Improved fixed headshell arm which I am mating with a NOS Shure V15VxMR but I also wanted to use a 12 inch arm. After much reading and researching I contacted Pete Riggle and he built me a 12" Woody Tonearm which I will mate with a Denon DL103 or DL103r. Pete build the arm to match the 124 and and DL103. Pete is a super nice guy to deal with and will build the arm to your specifications. His website is:
http://www.vtaf.com/id82.html
 
Good luck with your table!