Review: Rega Planar 3 Turntable


Category: Analog

This review will deal with the current Rega P3 turntable with Rega RB 300 tone arm and some of the updates that are
available for this venerable performer.

There is not much sense in going into a lengthy review of this table. It has been reviewed many times in the past years and in the Planar 3 or the current P 3 it has remained a bedrock of analog playback for well over 30 years and was updated by Rega to P3 in 2000.

However over the years some after market companies have offered several upgrades for the P 3. This will deal with the J.A. Michell Techno Weight for the RB 300 Tone Arm,the Deep Groove sub platter and the Iron Audio Acrylic Platter. Each of these upgrades brings the performance of the P 3 to a higher level of analog playback and each of these items are quite cost effective for the price/performance dollar invested.

Straight out of the box the Rega P3 is a great table and at its price/performnce ratio there is little in the market place that can touch it. In recent years the RB 300 tone arm has become somewhat of an icon in its own right,with many high end tables employing this arm or a derivative of the RB 300 in higher priced turntables.

However there is on the market today several counter weights for the RB 300. I have used the Expressimo and the Clear Audio offset counter weight with excellent results and this has moved the overall sonics of the RB 300 to loftier performance levels and has improved tracking to another level.

Although this time sought to use the J.A. Michell counter weight, which is the new buzz in Rega counter weights today. This is a well thought out design and the machining is top class all the way. This is a four piece system, which consists of new end stub,slider,2 counter weights and adjuster for stylus pressure. One counter weight for 3 to 6 grams the other counter weight for 6 to 13 grams, so virtually any modern phono cartridge is usable with the RB 300 arm. It does take a little more finesse to get this counter weight right than with the other two menetioned,but once properly set up, brings the overall sonics of the RB 300 several levels up from the other contenders. Vinyl Engine on the net has covered this counter weight and while I thought their claims were somewhat over embellished, I now have to admit that for the most part their analysis of the Michell Rega Counter Weight was right on. One just has to hear the RB 300 arm with this counter weight. It is a major leaque improvement of the stock Rega Counter Weight and easily surpasses the Expressimo and Clear Audio Rega counter weights. The Michell is far more precise in its overall execution and allows the RB 300 arm to far excell its performance bar. I highly recommend this J.A. Michell Counter Weight for the Rega RB 300 tone arm. A very worthwhile upgrade, that far belies its modest cost.

Next upgrade was the Rega sub platter, to the Deep Groove sub platter with ruby ball bearing. Not a lot has been written about this. However the stock sub platter on the P 3 is slighly off speed on the fast side and the general trick has been to add to electrical tape to the perimeter of the stock sub platter to get spot on speed. However the sub platter does not have much weight to it and is made of some plastic fiber material. Therefore the flywheel effect if any is quite minimal and the start time to speed is about 2 1/2 to 3 revolutions to 33.3 rpm.

The Deep Groove sub platter for the Rega P 3 solves a multitude of those inherent problems with the stock sub platter. The Deep Groove sub platter is precisioned machined from aluminium stock and is ever so slightly larger to avoid speed problems. The ruby ball bearing along with its lubricant allows the platter to reach full rotational speed in one revolution and appears to put less stress on the belt and motor pulley assembly and due to its slightly heavier weight adds the much needed flywheel effect to the P 3. This is a very easy install and can be
handled by anyone with basic turntable skills. The directions are clear concise and step by step and with 20 minutes at most the job is done. Using the VPI strobe disc confirm the one revolution to speed and was rock steady at 33.3 rpm. A great upgrade that is more than offset by the price and brings up the level of the P 3. I do recommend this upgrade as the Rega greatly benefits from the lower noise floor,flywheel effect and the reduced stress on the motor,belt and pulley.

The platter on the Rega P3 and other Regas has been the glass platter with felt mat. Although it was considered a revolution in its day, time and technology has pushed forward and the word today is acrylic platters. the one used here is the Iron Audio pure acrylic platter as replacement for the glass platter. This is a very nicely machined acrylic platter with frosted top and polished clear side. It is well balanced,flat without visible warpage and fits precisely of the Rega and Deep Groove sub platter. It is somewhat thicker than the glass platter and is slightly recessed underneath so that the stock height is retained. Nice side benefit to this is that the sub platter becomes less visible with the recess. The Iron Audio Acrylic Platter makes a tremendous difference in the sonics of the Rega. Sound stage is vastly opened,depth front to back is seamless and well defined and detail one thought that was not there, comes to life. This is one of the most dramatic upgrades with immediate benefits I can think of. Can be used with the stock Rega Felt Mat, or in this case the Herbie turntable mat.

These upgrades are more than cost effective,greatly enchance the overall performance of the venerable P3 to loftier heights and if your really into analog, these are a must have for the Rega Planar 3 or P3.

The Rega P 3 now competes and is on par with my VPI Scout and the overall cost is less.

The J.A. Michell Counter Weight was $125.00

The Deep Groove Sub Platter was $189.00

The Iron Audio Acrylic Platter was $95.00

The Rega P3 was purchased for $500.00

So at a total of $909.00 here is a great analog playback system that is on par with my VPI Scout at $1,500.00.

This is just posted as food for thought if one is considering the upgrade path for a Rega Planar 3 or P 3. Plus these do not have to be done all at once and can be added as time and budget dictates.

So if you have been looking at some of the higher priced tables, but budget dictates else, here is a solution that delivers perfomance one can get easily spolied to and one does not have to make excuses for. One of analogs great turntables with updates that bring it to higher levels of resolution with cost effectiveness a priority.

Doesn't get much better than this.

Associated gear
Click to view my Virtual System

Similar products
VPI,Oracle,Project, you name it,has been through here at one or another.
ferrari
I would only say that people have put the subplatters and acrylic platters in place and have claimed that it made speed lock steady.

Explanations of why things don't work in the face of reports from people who claim they do work, in real work practical applications, flies in the face of the theory.

The best thing about this forum ,and forums like this, is the reports from actual people doing actual listening tests with actual applications.

There are more than just a few reports of speed improvements using the subplatter/platter upgrades... or the world really is flat, in theory.
Gadfly ... read the original post. The subplatter corrects the ABSOLUTE speed of rotation to 33 1/3, where the stock subplatter runs slightly fast. Nowehere is improved speed stability mentioned.

I have never read even one review from a person who said that the subplatter or the acrylic platter improved the speed stability of a P3. Improved the sound, the evenness of the frequency response, yes, but not the speed stability.

My own experiences with the bearing oil suggest that if you hear any improvement in speed stability with the subplatter upgrade it's likely because you reoiled a bearing that was running slightly low on oil.

Now re-oiling the bearing costs less than $5 (hypoid gear oil from pep-boys) and levelling the table costs nothing. I was merely suggesting to do these things before dropping big bucks on the subplatter.

Yes I personally reoiled the bearing and personally listened before and after and the difference was dramatic. My bearing was not dry but the oil level was low.

The acrylic platter may improve the frequency response since it is very different acoustically, but unless it is of equal or greater weight to the glass platter I fail to see how it can possibly improve speed stability.
OK, I will re-oil the bearing. I have heard that Mobil 1 5/30w is the preferred.

I surely like a tweek that costs nothing.

Having said that, the stock subplatters are inferiorly machined. I can wee wobble in mine. My platter is the stock MDF. Adding a better machined subplatter with a denser platter should help; small motor variations are compensted by a better flywheel. This is theory at this point and I look forward to being proved wrong and only having to buy some oil.

Otherwise, I've got to go with the word on the street.
The correct oil is 90w hypoid gear oil (manual transmission oil). 5w30 will be far too thin.

I'd like to try 140w oil ... I have a feeling this might be better still.

you only need a few drops of oil, but a small rim of oil should appear at the top of the bearing housing with the spindle fully seated. you need a flashlight to peer under the seated subplatter.

I hope your results are as impressive as mine. Not only did speed stability improve, but tonality and treble improved. I guess the thin film of high viscosity oil is essential to preventing bearing surface contact.

The table must also be exactly level ... with the best level you can find. This is to try to minimise the tilting forces on the bearing that could make the spindle slightly off center.

If you eventually find the deep groove works much better than my much cheaper approach then I might reconsider. I was originally looking at the deep groove subplatter, but after my "oiling" experience I crossed it off my list of upgrades.
Great posts to this thread, thanks to all respondents.

On the subject of motor or gear oils. One has to keep in mind these are not mean't for low speed application. None of these lubricants will ever reach their thermal viscosity rating at low speed application. In particular multi viscosity oils, the polymer elasticer used in multi weight oils will fail to obtain their highest viscosity rating.

Why some manufacturers use engine motor oils as a spindle lubricant is a mystery to me, as all of these types of lubricants are not for low speed application. Single weight lubricants appear to be the worse of all applications due to the fact they will never reach the proper operating temperature in a low speed application.All lubricants have a temperature designed to work at,and the amount used is of no signifcance. In order to protect properly the lubricant must reach thermal stability.

Over the years I have found that the JA Michell spindle bearing oil has the right viscosity for turntable application and will work with any bearing I have used.

Proper leveling of a turntable is absolutely critical in proper operation. That has been a given for as long as we have had the analog medium. Take the time to make sure the turntable is level. The circle level bubble is one of the great devices to use for this.

In recent years speed controls for turntables have come to the forefront. By applying the correct 60Hz to the motor yeilds a signifcant sonic improvement. Seldom does anyone have a spot on 60Hz from the wall. Mine here is 61.8 Hz. Recently borrowed a friends VPI first generation unit. To my amazement the entire analog presentation moved to a level that was several steps above. So this is one item that does have a dramatic positive sonic impact of the analog medium. So in the near future will be using one of these with the Rega P3. If I can find a VPI or the newer Orbit 1 speed control. This is in my opinion a must have for any turntable.

The addition of a Speed Control unit will be the last upgrade to the Rega P3. In my opinion to do more to the Rega P3, one might as well move onto the VPI Scout or similar turntable.