2. cables
  3. 1440655922

interconnects

How important is the cable between the Preamp and Amp? I have been told and read that it is the last one to upgrade. You get a bigger up grade for the money if you do speaker cables or the interconnect between your Disc. player and Preamp? So if you have the chance to upgrade one of them and your Speaker cables and the interconnect between the Disc player and preamp are level above the Preamp-Amp connect. Would you upgrade the interconnect in the Disc player-Preamp to a higher level or would you do the Preamp-Amp interconnect to match the level of the other connection of Disc-Preamp? Yes to upgrade the Disc-Preamp interconnect would cost more than bring the Preamp Amp interconnect up to the levels of the rest.
Thanks for your impute
68pete
grey9hound
1,112 posts
 
try some Purist audio Design cables .
Very Very quiet.
I am using there ultimate USB from Jriver pc and their Dominus digital to the Lampizator Big 6 Dac and Venustas from the DAC to pre.Pre is Anthem D1
I have never been completely satisfied with various cables in this setup ... until now.
They are not cheap, but IMO well worth the price .
I am finally off of the cable train.
I used the Cable Company for demos
audio_hub's avatar
audio_hub
82 posts
 
it varies from system to sytem. However the most importart cable that needs to be replaced, its not IC but the power cords. Also a nice power conditioner will do even more good in your system
williewonka
3,068 posts
 
68Pete - you have received a wealth of good info from various posters - Almag's observations should be of particular interest and made note of.

A practice I have always adopted is to try to ensure the best cables are in place in the following order
1. Speaker cables first
2. next - pre-amp to amp
3. then source to pre-amp
4. finally - TT to phono (a source)

The reason for what some people may think of as bass-ackwards is because - if the speaker cables are not the best quality - they will not reveal all of the benefits of upgrading an interconnect.

This was a theory until recently - when I installed an extremely good IC from my phono to my amp. The full benefit could not be heard until I upgraded the speaker cables to a pair of a similar quality, then the full benefits of this IC upgrade could really be heard.

But I stress - these were extremely high end cables with exraordinary resolution capabilities.

So to answer your question simply - I consider the IC between the pre-amp and amp to be second only to speaker cables in their "level of importance".

Having said that - I have an integrated amp, so I have no first hand experience with this actual type of IC. :-)

But wire is wire :-)

Regards...
stringreen's avatar
stringreen
6,370 posts
 
The very first one to upgrade is the power cord.
grey9hound
1,112 posts
 
power cords are so hit or miss
More to discover