Dynaudio Focus 140 vs Totem Model 1 Signature


Looking for a comparison of the dynamic capabilities of these two speakers. I've heard the Totems and was impressed by their dynamic snap (as well as their bass and soundstaging). The Dynaudios are quite similar to my understanding (same bass driver) but a bit smoother on top and easier to drive--a possible benefit since I'll be using an NAD C325BEE, at least in the short-term. If the Dynaudios are as dynamic, I'm wondering if they might be my better choice. Also, does anyone know if either plays better at low volumes?

Thanks in advance!
ablang
Ablang - Both the affordable Sim Audio i-1 and the Naim Nait5v.2 use robust power supplies with a fairly simple and efficient circuit. Unless you intend on cracking walls and shaking picture frames off a desk; they should be able to provide ample current for anything in Dynaudio's Focus range.

A 50w tube integrated would also suffice in most case scenarios. Although I admit; I'm not the right guy to confront about affordable tube integrated amps. While I love the warm touch of a valve, I haven't encountered too many truly affordable amps that could tickle my fancy.

My suggestion would be to follow up with the folks at Naim or Sim Audio. Ask them for their opinions. If I were in your position, I'd eye-ball either the Sim Audio i-1/CD-1 set-up, or the Naim CD5i / Nait 5i *version 2* set-up. You get synergy, form and function, well engineered electronics that are a proven match with Dynaudio (and even Totem) loudspeakers.

All the best!
Thanks again, Rumadian. Looks like I have some strong possibilities that won't break the bank. I've liked what I've heard about Simaudio gear, and I am leaning heavily toward the Dynaudios.
Have to agree with rumadian and Jaybo.

On the Naim Front - I have never yet heard a pair of speakers that the Nait 5i integrated could not drive to comfortably loud listening levels and still make it sound like (real) music, including: Quad 21L, Devore Gibbon 8's, Totem Arros, Hawks & Forest, Epos M16 and Naim's own SL2. Note that these are all small floor standers and may be slightly more efficient than the smaller monitors you are considering. These speakers are all ass kickers by the way, just in case you are ever looking for a bit larger box.

Other random notes:

Another Dynaudio monitor that I have been impressed by is the Audience 52. This is a bigger box than the Focus 140, and sounds like it. I listened carefully to this speaker driven by a Rega P3 TT and a PrimaLuna ProLogue 2 integrated tube amp, and was QUITE IMPRESSED. The ProLogue is only rated at 40 W, but was easily able to drive the 52's. This amp might also work well with the 140's since they have the same sensitivity rating (86db). Not sure the used price for this amp is below $1000 yet, but it's worth a look.

I also demoed the Dynaudio Audience 72 floor stander with NAD separates driven by an NAD cd player, and that combination sounded very nice, although the NAD amp (C272) was packing considerably more horsepower than a the C325. Again, the little NAD will make pretty noise with either the Totem 1's or the little Dynaudio Focus, but you will just need a more capable amp to extract the total goodness therein.
It all comes down to your taste whether great mid range and imaging that you crave or the tighter bass that you like. Good electronics (amplification) plays a big role too.