Levinson 432/436 turn on 'pop'


Hello,

I purchased a few Levinson 432 stereo and 436 mono amplifiers. All of them seem to have the same 'pop' when I switch the amps on/off. It's especially bad when turning the amps on, my woofers extend outward fully for a few seconds, I'm worried it could be damaging my speakers so I just keep the amps on all the time for now.

Does anyone know if this is normal for Levinson amps or what the issue could be? I wouldn't think all 6 amps would have the same problem. Maybe some issue elsewhere in my system could cause this? I'm also using a PS Audio Premiere power conditioner.

I really don't want to lug all six 100+ lbs amps to the repair shop...

Thanks,
Chris
128x128cjwessing
Pop is happening when I go from standby to on or sleep to on, tried all the turn on configurations including a trigger. Just to note, I'm using a McIntosh MX-132 preamp.

Tried making some homemade XLR shorting straps between pins 1 and 3, pop is now gone when I turn on the amp but is now more noticeable when I turn off the amp. It does not fully extend the woofers, though.

I have 6 amps and they all do the same thing, which tells me its something else in my system. Also, since the homemade shorting strap had some effect, I'm hopeful thats the issue and a stock shorting strap might fix the issue.

I'm also hoping to find a XLR preamp or even use the XLR inputs with an RCA to XLR adapter. Let me kniw if anyone in LA has an XLR preamp they would like to part with.

Thanks for all the help,
Chris
HAve you tried powering the amps directly from the wall socket and avoiding the power conditioner? Very few conditioners can handle the demand that high power amps place, especially the peak at turn on.
Yup, tried that still to no avail. Gunna order some Cardas shorting straps and an Integra DHC-80.2 with XLR outputs...
Cjwessing

Did you solved this issue? I have the same exact issue running unbalanced IC. No pop if I disconnected all IC from the amp.

Did Cardas shorting straps solve it?

Thanks