Marantz 2325's interaction with 4 speakers/load?


I am bidding on a Marantz 2325 amp, and want to know can I drive my Thor speakers (like 6 ohm, I think) on one set of outs and with the other speaker outs run a pair of Seas W26's as woofers(has a proper xover). Will this load damage the amp over time? are the Marantz's built "like a tank", so no problem?? I wish to see how much more dynamics I can get out of the Thors with the Marantz, vs the little Jadis Orchestra intergrated. I use to have a Marantz 2015, for a little guy, sure was nice sound. I recall there was talk back in the 70's that the 2265/2250 was more musical vs the bigger Marantz's. True?
bartokfan
Almost forgot, I have been using a 2240 for almost two years now ...
musical, beefy sounding receiver. I have been using it with NHT SB2's
and it has been a super combination. I have just ordered a pair of
Omega's Super 3's (but in the TS3 body) and can't wait to hook up this
modified Fostex one speaker/ cross-over less system to the Marantz.
Should be outrageous ... or as outrageous as this stuff gets. By the way,
I have found the 2240 (made in 1974) preferable in just about every way
to the 2216B (made in 1978 and currently used as a tuner). I do not
agree that the later date Marantz babies are all that others make them
out to be.

BTW, Jerry's moniker is BOLD Eagle ... these bi-focals have to go!

Regards, Rich
Go to web site www.clasic-audio.com .Click on Marantz.then scroll down click on 2325.What is the "ohm rating" on the W26`s.Are you sure the Thor are 6 ohm.The vintage old Marantz receivers were built like a tank.I don`t know though if it would handle 2 sets of 4 ohm loads.2 sets of 6 ohm I don`t think there would be any problem.Just remember the the old girl is almost 30 years old.You will have to treat her as such.
How could I forget/overlook the fact that the Thors are a 4 ohm speaker, requiring plenty of high quality juice to make them come alive with dynamics. So the 2325 is 125 into 8 ohms. Will the 30 yr amp be ok driving these 4 ohms at low volume, which is how I listen. Also I want to use the satalite speaker outs to drive the W26's which are 4 ohms...I got a feeling I may be asking for trouble, seeing the amp described at 125 into 8 ohms, thus may be unhappy with the 4 speakers at 4 ohms. Workable?
Supposedly, the Marantz 22XX receivers were stable at 2 ohms , which is the load that 2 sets of 4ohms speakers would present. Time to do some research either on Audio Asylum or with the names that I provided to you. Another source would be A.G. Tannenbaum for a technical manual. Also, Mike Zaccaro out of San Diego is a former Marantz technician who frequents the Vintage Asylum.

Regards, Rich
Rich, that the 22XX series could handle 2 sets 4 ohms speakers may be true in its first years of life, but as Jea48 mentions, the "old faithful" is going on 30+, so I don't want to press my luck. I'll use the 2325 for the Thors only, buy a second Marantz(not sure which, maybe the 2265) as a biamp for the W26's. Thats probably what I'll do. I'll follow up on the links, thanks for the links. Funny how the more things change, some things remain the same, The Marantz 70's quality still shines, as witnessed on the reviews. I'll keep everyone posted on the results. I think the Thors will take a toll on the Jadis, as I need to put the treble all the up for proper dynamics to come in on the Thors, without music on, vol up all the way+treble up all the way, I hear a pretty loud hum comming from right channel. Not sure what that is, believe it started with the Thors last month. I'll have a tech ck it out.But as I say, with treble down alittle, the hum fades greatly. The tone controls on the Jadis are not like those on ss units, basicall its an on/off setup, with no gain increments.