Reactions to HP's review of Antique Sound Lab amp?

Bias takes a little time as the 16 (8 per side) set screws are somewhat sensitive to slight movement to reach 485. Front meter makes it relatively easy to reach 485 RANGE. 10 minutes tops unless you are completely anal- then occasionally bias until unit breaks in and bias settles.

One comment in passing from that review was that the generic Chinese KT88 s were more than ok and swapping them out was unnecessary. My ASL MGSI 15DT uses these-- first thing I did when I got the amp was buy new JJ/Tesla KT88s, Tomorrow I'll put the Chinese tubes back in and see what they sound like, BTW just put in Kimber Hero I/C with this amp and what a difference!

Jkaway and Judesonis.....thanks for the update....keep us all posted! I am still waiting for mine (NYC) but will report back to all of you of my experience after I receive them. Thanks for the update on the biasing.
From the picture of the amp, it looks like the set screws are on the side....correct? It does look easy....even for a person (no tech) like me!!

Correct- The 8 set screws are on the side. Round knob is used to rotor through the digital meter readout for each of the 8 tubes.Enjoy it. A great amp.

In case I was not clear the round knob is turned as you bias each KT88 with the 8 set screws so as to allow the digital readout for each individual tube.