Why use a super accurate cartridge protractor


In discussions about cartridge setup, there are those who say that unless one has a cartridge setup protractor like the Mint, Wally Tractor, Dennesen, etc. one cannot expect to extract maximum performance from your rig. Then there are those that say that even the best alignment tool still only nets you a position that needs further tweaking by ear. In my case, I've used a Dennesen and a number of downloadable free protractors and have been able to get good results with the free downloads if I took my time to make those little .5mm shifts that make sound pop into best focus. Is the superiority of a Mint or a Wally Tractor because one doesn't have to make those final last tiny adjustments? Is it that the mirror surface is easier on the eyes?
photon46

Showing 1 response by syntax

Precision is mandatory. When we multiply a regular Tonearm by Factor 100, the Arm is about 27.34yd (25m) long, the Cartridge System is about 1.09 yd (1m) high with a Length of the cantilever in the area of 0.55 yd (0.5m) and the contact area from the Diamond is only 0.020 in. (0,5mm) ! Similar is the Mass in comparison. (Another chapter for side wall pressure and diamond polishing...)
A simple example to show what analog reproduction really is ... And why sonic performance can be improved with some care and the right tool.
But honestly, buying new cartridges - and writing about it - create more fun...