What makes speaker's sound big?


Does a speaker need to have many drivers or a large driver area to sound big and fill the room?
I am asking this question because I have a pair of tekton design double impact and would like to replace them with smaller speakers and a pair of subwoofer's to better integrate the bass into my room.
I just borrowed a set of B&W 702S. The are good but the just don't make that floor to ceiling sound that I like.
Maybe I have already answered my own question (: But again I have not heard all the speakers out there.
My room measure 15x19' and the ceiling goes from 7.5 to 12.8'

martin-andersen
radiating area of drivers
dispersion characteristics of drivers
distance between drivers
baffle design
boundary reflections
placement
When talking about sounding big that usually translates to full extended bass. Powered subs are your friends there. Big = powerful and the bass is where most of the power in music occurs. It takes exponentially more power to deliver flat response as the frequency decreases and that power must be converted to long wavelength sound waves so that pretty much explains it. Tiny drivers/speakers alone are more challenged to deliver full extended bass and all fall short alone to some extent.
This is a great subject and one I have thought about, or wrestled with for some time. Thanks for all the very good views and thoughts expressed.

I owned Martin Logan SL3s as primary audio speakers for 16 years and loved the immersion. I equally agree with getting that from Maggies! And I think it is the bi-pole nature that does help in that aspect.   I moved finally to Dynaudio Sapphires and they were a much larger sound than any of my conventional coned dynamic speakers. Yes, "horsepower" (good one!)

But the brand I'm living with now are Raidhos and although the D2s won't do what the much larger ones will do I still love the tonality and rich clarity plus tight bass to near 30. But, to enlarge that sound I have dialed in an REL Britannia B1 at 28Hz and low volume and it opens up large halls.

There are lots of great inexpensive powered subs that will integrate better than most of years ago, and they uncannily open up everything for a subjectively larger sound.   It's almost stunning that a simple $1k SVS SB-3000 is pretty much the equal of the B1 (or better?) at 1/3 the price. Unreal. Maybe that is one of the least expensive ways of getting 'bigger sound'.  Fun topic.



Stay with tekton, add some subs, two at least, avoid filters if you have them, make sure your amp plugged in to the wall, jump into middle and bass highliting cables and tubes if you have them, try to seal other rooms in your house, just close all the doors when listening.