The focus and air lie


There always have been some kind of fashion in the way a system sounds and since a few years it seems that more and more people are looking for details, air and pinpoint focus / soundstaging.
There's a lot of components, accessories and speakers designed to fill full that demand... Halcro, dCS, Esoteric, Nordost, BW, GamuT are some examples.

This sound does NOT exist in real life, when you're at a concert the sound is full not airy, the soundstage exist of course but it's definitely not as focused as many of the systems you can hear in the hifi shops, it just fill the room.

To get that focus and air hifi components cheats, it's all in the meds and high meds, a bit less meds, a bit more high meds and you get the details, the air, the focus BUT you loose timbral accuracy, fullness.
It's evident for someone accustomed to unamplified concert that a lot of systems are lean and far from sounding real.

Those systems are also very picky about recordings : good recordings will be ok but everything else will be more difficult...
That's a shame because a hifi system should be able to trasmit music soul even on bad recording.
In 2008 this is a very rare quality.

So why does this happened ?

Did audiophiles stopped to listen unamplified music and lost contact with the real thing ?

Is it easier for shops to sell components that sounds so "detailled and impressive" during their 30mins or 1 hour demo ?
ndeslions
Learsfool, your comments on the "real space" are exactly right. The contribution of the environment in which the recording was made can't be underestimated. IMHO, after the placement of microphones, it's the second critical factor.
one problem is the designers who may be motivated by fear of poor reviews. thus products are designed to extract every bit of data on the recording.

many of the products of 20 + years ago create a more timbrally realistic presentation than those in current production.

as has been said recordings are also part of the problem.
I don't think recordings are the main problem.
The problem is that components cheats to give illusion that they extract every bit of data. The more they cheat the less they sound balanced and balance is the key imo.
It's the most important quality.
Ndeslions speaks a lot of truth.

I have auditioned so many mega $$$ digital sources and amps that has this phenomena. Etched and focussed sound images. Mostly stripped of air soundstage.

Real live music (non amplified for the most part) has plenty of air around notes (Sounds basically generates by movement of air, Duh!). The more instruments on stage playing, the more the air movement. Sometimes so much that some high freq can even sound blurred-not so etched) when played in sync with bassey sounds. this is due to interaction of sound field (moved air) This moved air bounces off rear and side walls and propels forward. You can feel the air in your face and body if you are seating in front rows.
I guess I can't see why studio recordings would not have 'some' air during recording sessions. It got to in order to produce sound. May be not as much as normal venue since the walls probably are much absorptive. But there is still lot of air has to be to produce sound/s. So it comes down to recording process and recording equipment and/or Reproducing components. The fact that some components do a good job of reproducing the air tells me that it might be, for the most part ( and recording process to certain extent) the component's design be the culprit, as Ndeslions says.