In crossover design the typical usage is:
Low frequency use red and black.
High frequency use white (substitute for red) and blue (for black).
I am not familiar with the cables you have but if they are all connected at the amp end and all individual wires are the same construction then it really does not matter as long as you connect each speaker in the same configuration.
If the wires are different construction (red/black different gauge/material from the white/blue pair) then put them as indicated above.
Good luck.
Low frequency use red and black.
High frequency use white (substitute for red) and blue (for black).
I am not familiar with the cables you have but if they are all connected at the amp end and all individual wires are the same construction then it really does not matter as long as you connect each speaker in the same configuration.
If the wires are different construction (red/black different gauge/material from the white/blue pair) then put them as indicated above.
Good luck.