2. amps-preamps
  3. 151264-76794

Preamp with Headphone Amp - Tech Considerations

I’m considering using a Hovland HP-100MC preamp to feed two sources into a Auralic Taurus MkII headphone amplifier. Is this acceptable assuming proper impedance matching and ensuring I don’t overdrive the headphone amp?

The output impedance on the Hovland is as high as 4300ohms @ 20Hz and the input impedance on the Taurus MkII is 100Kohm with the single ended input. So I don’t see an issue regarding impedance matching.

I was planning to set the volume on the hovland HP-100 at the 3 O’Clock position, which represents approximate unity gain (per Stereophile).

Are there any other issues I need to be aware of? I know I can just try it, but I wanted to start thinking about things before I start messing with my existing setup. Thanks.
cbl117

Showing 1 response by erik_squires

erik_squires
15,677 posts
 
The rule of thumb is that amp input impedance should be 10x preamp output.

So, you want to keep your final impedance > 43kOhms

2 x 100kOhm inputs = 50kOhms, just above the line.


More to discover