2. cables
  3. 132597-2647

NEW Cerious Technologies Upgrade - Graphene Matrix Cables

CT Graphene Matrix Cables:

I have been using the CT GE cables for almost two years.
I recently traded up for a full loom of CT Graphene Matrix cables, including speaker, interconnect and PCs, and I wanted to share my experience. I started by replacing only the ICs to try and hear the differences.

The new Matrix interconnects sounded better than the GE immediately after install. I found the original Graphene Extreme ICs to be good but not on the same level as the outstanding GE speaker cables. As break-in started to clear things up, I can hear more clarity and detail not heard before. The ICs are incredible on their own and at the 30 hour mark, I can hear a clear superiority over the GE ICs. I recently started using the Teo Game Changer ICs and preferred them over GE but the Teo has now fallen to the new Graphene Matrix ICs. My Teo’s were and are great, and it is stunning to experience Cerious Technologies commitment to making great technology better.

On the third day of listening to the GM ICs. I couldn’t wait anymore, Having too much fun. I then installed the speaker cables and power cords once I had a pretty good feel for the sound of the GM ICs.

With the full loom of GM cables running in they are going through some strange changes and definitely need time to settle down before realizing what they can really do and very important Bob says to not move them. Since I have a home office I can let them run in all day. I’m at around 120 hours now and they are still improving. Here’s what I’m hearing:

Extended highs and tighter lows.
More detail and better low level listening
Drums are tighter, more clearly defined. So real is the snap of the snare drum. The bass has more depth, seemingly goes deeper, lower. This aspect stands out the most.

I am not in the industry, I’m not an engineer, I don’t work for Cerious Technologies, but I am a fan of the cables and am enjoying what my system is capable of.

I’m closer to my own pinnacle of sound reproduction than ever before.

Lance

lancelock
rgrost
124 posts
 
Hi everybody...Bob from Cerious...
Connectors are such a pain. Everyone has a favorite! We try to offer the best possible performance at the lowest cost. We demand intrinsic value. Many connectors today are little more than jewelry and are actually more poorly made than the knock offs that cost 1/10 the price. We do not use Viborg connectors. We do have our connectors custom made by the parent company to our parameters of plating and clearances. It is fascinating to deal with Chinese companies who can make anything you want - you just have to be very specific about what you want. Now...addressing Furutech connectors. I have never had an experience with Furutech connectors that was positive. While it is impressive to polish the internal metal parts to a high shine, the parts of the connector that screw together to clamp the connector housing in place over the cable so it does not spin requires some friction only available with a rough surface. My son had to reef on the connector to get it even close to being stable. It still had movement and wound up shorting by how much pressure was exerted on the internal conductors.
Those of you who have dealt with us in the past know that we go more than the extra mile to take care of our customers. We can no longer deal with Furutech connectors. Just too difficult to work with in the configuration of the Matrix conductors and damping jacket. Thanks everybody!
Bob
aniwolfe
752 posts
 
Since we don't know the name of the chinese connectors you use... I will officially name them Grostborg?
t_ramey
632 posts
 
That’s funny Bob you mention that some of the knock off connectors are being made better than other name brands. When I received the set of Furutech NCF’s and started to terminate them my first thought was how much cheaper they felt in my hand compared to the Chinese knock off FI-50’s I’ve been using that someone here shared (I believe it was lak).

https://www.ebay.com/itm/1-Set-Copper-Rhodium-Plated-US-AC-Power-Plug-Carbon-Fiber-Connector-Adapter...

The knock offs seem easier to work with as well. To me these cheap versions are on par with the standard Furutech FI-50’s whereas the NCF’s are clearly superior sounding with their nano crystal formula being the difference but for $500 to $700 more depending on where you get them.
thezaks
712 posts
 
It's amazing how much connectors can affect the sonics.  I've even been amazed at the difference between gold, silver, and rhodium connectors.  So I'm sure it's a balance of finding connectors that provide great sound, as well as reliability and cost.  I'm glad that Bob, who has lots of experience and does this every day, is figuring out this balance and complimenting his cable in the best way possible for us. 

Dave
jgoomba5
8 posts
 
I have found  off-brand Indonesian safety pin connectors provide best synergy in my system. Of course, YMMV
More to discover