2. amps-preamps
  3. 1304895409

Loud buzz / hum on my Aesthestix Calypso Preamp?

Help needed - Originally it was very soft and now it’s getting loud right from the get go on both channels from the speakers.
Changed tubes from Mullard to EH Gold pins and each time its turned on, the hum does not go away and the volume generally is much softer than normal probably by 5 to 10db give or take. Occasionally its present only at the beginning of start up, probably 2 minutes and it slowly goes away completely. Placed the original Mullard tubes back and the hum is still there. Power amp is via ARC VS110 unbalanced. Its still present, loud enough to frustrate! Did anyone have issues with EH tubes with their Calypso preamp?
Any suggestions?
rapogee

Showing 3 responses by lak

lak's avatar
Ag insider logo xs@2x
lak
4,529 posts
 
Rapogee,
Is your Aesthestix Calypso Preamp plugged into a line conditioner or the AC directly from the wall?
lak's avatar
Ag insider logo xs@2x
lak
4,529 posts
 
Check the voltage coming ot of your regenerator (by PS Audio) and see if it's normal voltage or in the normal range or higher, OR plug your preamp into a wall outlet (just for the heck of it) as see if the problem continues. I have found that my Aesthestix Calypso is very sensitive to any voltage that is elevated. Please report back one way or the other, I'd personally be interested.
lak's avatar
Ag insider logo xs@2x
lak
4,529 posts
 
I had my Calypso Plugged into my T-4 line conditioner (in one of my systems pictures) and both speakers were humming. Eventually I plugged the Calypso into the wall outlet and that solved my problems. The T-4 was out-putting 130 volts or so. Didn't bother my tuner of CDP but bothered the Calypso!
More to discover