Ask TW Acustic for the specs or have them do the armboard.
Graham Phantom B44 on a TW Acustic Raven AC1
Hi folks,
I�m requesting your help to fit a Graham Phantom B44 (9�) to a TW Acustic Raven AC1. I�ve bought both second hand and the TT comes with a blank brass arm base that needs to be drilled for the Graham.
I�ve got the 5 (1 + 4) holes diameter but not a clue about their positioning in the brass base. Ideally I would need, in order of preference:
- A drawing with the holes position that I could pass to the workshop that will mechanize the base
- A picture of a drilled base without the arm, so I could develop the drawing out of it
- Some positioning info, like distance of holes from base outer limits, distance between holes, etc
The four small holes position is crucial, because it will set the parallelism of the arm.
Any information about this will be gratefully received.
Thanks and regards
Chema
I�m requesting your help to fit a Graham Phantom B44 (9�) to a TW Acustic Raven AC1. I�ve bought both second hand and the TT comes with a blank brass arm base that needs to be drilled for the Graham.
I�ve got the 5 (1 + 4) holes diameter but not a clue about their positioning in the brass base. Ideally I would need, in order of preference:
- A drawing with the holes position that I could pass to the workshop that will mechanize the base
- A picture of a drilled base without the arm, so I could develop the drawing out of it
- Some positioning info, like distance of holes from base outer limits, distance between holes, etc
The four small holes position is crucial, because it will set the parallelism of the arm.
Any information about this will be gratefully received.
Thanks and regards
Chema