Sorry. Where do you source the 16awg wire?
Duelund conversion to DIY Helix Geometry Cabling
I have been an avid user of the Duelund cabling for over two years now and have used them exclusively in my system with great results. I have built many for friends and have used a full loom of interconnects, speaker cables, power cords and an extensive wiring modification for a previously owned balanced power conditioner utilizing Duelund 600V PolyCast wiring which was transformative. My cabling desires can be a little addictive as I have owned and evaluated 40+ brands of cabling costing more than an entire stereo system!
Over the past six months I stumbled upon a thread here on Audiogon in regards to a Helix designed cabling and as you probably already know, I just had to look a little deeper into this cable design…After a month of studying and sourcing parts, I decided to reach out to the designer/architect, Williewonka who gave more insights and philosophy on how the cable came into existence.
That conversation got the ball rolling in converting one of my KLE Duelund interconnects to Steve’s Helix designed which only entailed replacing the neutral with a Mil-Spec 16 AWG silver-plated copper wire with the neural wire being 3 times longer than the signal wire and of course the “Coiling” of the neutral wire : )
After the modification was complete, I was not sure what to expect from the Helix cabling but I was quite shocked with the results with “ZERO” burn-in time…The sound stage became much wider/deeper with a much tighter/focused image and clarity/transparency is like nothing I have ever heard in any cabling regardless of cost. In fact, I just sold a full loom of a commercially designed Helix Cable that’s renowned around the world and has more direct sale than any cable manufacturer; these $200 DIY Helix Cables walked all over them…
I believe you will hear the same results as I have and have heard back from friends who have already modified their Duelunds with the same results; WOW! Remember the cables will need 200+ hours to burn-in and settle into your system. My system is now 90% DIY Helix to include IC, SC, PC and Coax with each cabling adding its beauty of an organic and natural presentation that draws you into the fabric of the music.
You can tailor the sound of your cables using Duelund, Mundorf silver/1% gold, the outstanding Vh Audio OCC Solid Copper or Silver with Airlok Insulation or your favorite wiring and you can change it at any time…
http://www.image99.net/blog/files/category-diy-cables.html
https://forum.audiogon.com/discussions/difference-in-sound-between-copper-and-silver-digital-cables
https://forum.audiogon.com/discussions/adding-shielding-to-existing-cables
Enjoy,
Wig
@mbolek - re:
The Vquad wire has a lot of insulation - and its the insulaton that impacts clarity and details in all cables. Whilst I was initially aprehensive about usnig silver wire for the signal wires due to fears of cost vs. performance - the improvements in performance with the solid silver wire was very noticeable - even before any break-in. For interconencts - 5N Solid Silver UP-OCC bare wire is now my first choice and recommendation. Regards - Steve
|
@pindac - where do you buy this wire? I have only found both the wires you talk about listed as Mains bulk cables - which is much larger than required for interconencts. Are you using DUCC for Interconnects? 0 if so, do you seperate strands to get a finer gauge? Unfortunately the PM function does not allow links like the forums do, so you should post any links here Regards - Steve |
@williewonka The Speaker Cables being adopted by the other converts are Solid Core SAEC which I have learned has an increased gauge to my supply, which has a 0.9mm (19 awg) diameter Solid Core wire. I will PM later with a link attached for the Wire I use, that is easy to obtain, a couple of the stranded wire types has proven difficult to acquire. If this wire is off interest, it will be worthwhile looking at D.U.C.C, as I am using this wire and CCC as standard assembly RCA Interconnects, the D.U.C.C offers a slight perception of adding a hint of richness when compared to PC Triple C, but has proved to be more more attractive that OCC interconnects, especially for the differences noticed to quietness and smearing. I found D.U.C.C really stood out when used on my digital source. |
Hey Steve, Thanks for the update. I was ready to pull the trigger on a copper build. Your comments may sway me toward the silver. I’m planning an XLR version, assuming you would use two silver conductors for the signal wires and the 16awg for the Helix neutral. Also thinking about a hybrid version that uses Chris’ v-quad wire and then do a helix wrap.
|
The Ultimate Helix DIY Cable - Update! The wire/RCA’s arrived today so I was able to construct an Interconnect cable with 2 x 20 gauge UP-OCC solid silver signal with a 1 x 16 guage UP-OCC solid copper with teflon insulation. With just a few hours break-in it would appear that this cable is a real winner. As suspected the magic is in the Silver UP-OCC solid wire indisde Teflon tubes and not so much the neutral conductor. I spent an hour going through my audition tracks plus a few other select tracks and tthe results were just as stunning as the the cables with a neutral made from 2 x 18 gauge Solid copper in Teflon tube. The 1 x 16 gaue with Teflon insulation neutral is much easier to wind and is cheaper. The image is breathakingly large and very focused - the clarity and details are superb. The warmth and body I spoke of in my comments a couple of posts ago I believe are due to the improved focus of artist/instrument placement within the image is allowing improved isolation and hence much imporved clarity
Regards - Steve
|
@pindac - can you provide a link to this wire so I can take a look at it please - thanks The only thinng I have found to date is the Furutech CCC bulk power cable, which is stranded.
When you say that others a prefering the CCC to UP-OCC are they comparing soolid wire to solid wire? Mant Thanks - Steve
|
@bigslacker RE:
$COST was the main reason.
The 2 x 20 gauge Silver compared to the 2 x 18 gauge copper had more "body" and sounded more complete and warmer, with a nicer image and faster dynamics.
I'm not sure the 2 x18 gauge solid silver would be worth the additoinal cost, but you could always try it and report back I'll post observations on my second cable here. Regards - Steve
|
I have quite a stock of PC Triple C Wire to produce my Helix Cables. I am behind with this as a task in hand as with many other tasks to be completed. The Dual Mono Balanced Pre is still to start, as well as the conversion of the Power Amp's to Balanced, so it is not too much of a pressure at present to achieve the Cable Build. I have been talking about my impressions with PC Triple C and loaning my assembled Interconnect Cables produced with this wire to other HiFi enthusiast friends, many of whom are sure that the OCC wire already in use, is not going to be improved upon. There are, as a result of my interventions and passed on word of mouth reports, new reports becoming regularly seen on the usage of the wire, which is slowly bringing to fruition a host of individuals starting to replace their OCC wire with the PC Triple C wire Interconnects. It would be great if a respected authority on the Helix Design could adopt the PC Triple C wire and produce a build with this different wire design. Not too long ago, I would have claimed to have had a gut feeling that something that could impress was achievable, as that was my own singular experience, with the recent activity, I am feeling very confident there will be something on offer that has not been experienced, and will create a positive response. |
@mbolek - Whilst I have not had the opportunity to try Zavfino cables for myelf I have read their product literature in depth regarding their application of:
However, the latest Helix bare wire in Teflon Tubes adaption has proven exceptional
I think you will be surprised (in a good way) by the Helix, even when compared to very good cables like Zavfino. As for.....
Agreed! - Zavfino do build a very nice looking cable!
For me, this journey has not been a "competition" between the Helix and other brands My goal was to:
it all stared with a an idea for a different approach to cable design and some old LAN cables
So if you do try the Helix cables - post your "cable recipe" and findings here
Regards - Steve
|
@williewonka -Thanks for your feedback. Lots of different parameters that can affect the sound. For me, I rely on good conductors, low mass connectors (or no connectors), and secure connections. Rather be listening to music than pondering all the variables.... I like building cables, not as extensively as you, but it’s a nice hobby. Helix build with the bare UP-OCC is in my near future. Although, after listening to some Zavfino stuff, I’m really impressed. At their price points, I’ll be hard pressed to build anything that looks and performs as well. Appreciate all your attention to the details and real world feedback.
Marty
|
@mbolek - you have touched on a subject that I am yet to observe, despite having tried it many times with a variety of cables - e.g. power, interconnect and speaker cables. I do not doubt the observations of others - i.e. a cable sounds better in a specific direction.
Since I have never observed this phenom I no longer account for it in my builds and so far I have not been disappointed. But you do make a valid point - should the wire be reversed for the neutral?
Sorry I could not be of more assistance Regards - Steve |
@williewonka - I always wanted to understand the signal flow and what is claimed to be directional wire. I know when you get to OCC quality the wire is drawn/produced in a certain way and there is a consensus that signal flow should follow that direction. My specific question for DIY speaker cables - If you buy into this directional approach, should you have positive and negative runs in opposite directions? I have used a lot of Furutech Alpha hook up wire and have followed their directional arrows. Can't claim that I can tell a difference, but this one kept me up thinking last night.... Marty
|
RE: The Ultimate Helix DIY Cable - I forgot to mention that when winding the helix conductor ..
Other than that - break-in is proceeding very nicely. Regards - Steve
|
@fai_v - this appears to be an older amplifier. The balanced symmetrical design is relatively recent, I also saw no warnings on picture of the amp (rear view) that indicates the amp is a balanced symmetrical design. I believe the Helix cables will work with this amp Regards - Steve
|
The Ultimate Helix DIY Cable ? - I think so This version implements everything I have learned/tried over the past few years
I pondered this build for about 3 months because of the difficulties there might be attempting to wind a coil using a solid wire inside a Teflon tube - and not only one wire, but two wires, because this build would adopt the Double/Double approach.
The rest of the fabrication went without problem - I used a 3/16" (5mm) rod to wind the coil on. Another concern was whether there would be sufficient improvement to justify the expense of using silver wire? The answer came as soon as I plugged in the cables, bridging from my Bluesound Node 2i to my Bryston B135 amp - that uses...
Well - this new Interconnect has surpassed all of my expectations..
This is probably the end of the line for the Helix, mainly because because I am all out of ideas as to where to take them next :-) But boy-oh-boy - what an ending! It’s good to end on "a high note" - pun intended :-) Give them a try - for me it was worth it Regards - Steve |
Thanks. I ordered a batch of parts from Take Five Audio. They had all of the parts in 1 place and they ship down here to the States cheaply.
🤞 I got the tubing sizes correct.
Thanks for the amazing thread @williewonka @wig @grannyring and everyone.
Ron
|
@bigslacker - That is correct - it provides the very best performance because
For best results the inside diameter of the tube should be 25% - 30% larger than the diameter of the bare wire to be most effective. Larger is OK, but does not yield any better results Hope that helps
|
@williewonka In your post from Jan-15 '22, are you still putting each signal wire inside it’s own Teflon tube?
|
@mawe - There appears to be some interesting articles on the web on this topic
So the Helix basically has
I do think this is where common sense has to be applied to the ground wire.
However - that ground is not there to allow the component to continue functioning normally.
The only other instance I am aware of where wire sizes of all three wires MUST BE IDENTICAL is
Having said all of that - it you are concerned about the different gauges used
Regards - Steve |
Thank you very much for the clarification! I will search out vendors for the materials. My first goto is usually partsconnexion as long as they have the item in stock. And again thank you so much for this cable receipe - I have made a set of rca interconnects 2 years ago and they are very nice. I have built a new system in my great room and now am ready to replace all the cables with your helix design. So I will finally get to hear it to it's full effect. Best wishes. |
Steve, just a comment on your proposal for power cords:
According safety regulations in Europe you need to have the ground wire minimum the same size as the “life” and “neutral “ conductors. I’m not sure how this is in US, but would guess it is the same as well. |
@dbass - here’s what I am using at present
I buy my UP-OCC 6N solid bare wire from parts connexion because I only use the Air adaption for all my Helix cables, which requires bare wire inside a teflon tube - it saves me having to strip the Teflon insulation off of the Neotech and I think it provided a little better dynamic performance https://www.partsconnexion.com/occ6n-copper-hook-up-wire.html They also have Neotech wire and many other brands But shop around - there are deals to be had - just make sure you are comparing apples to apples The silver plated Mil-spec I order from Take Five Audio - again there are alternative from other vendors, so shop around Deep Cryo Treated Cable And Wire - (takefiveaudio.com) Others on this thread prefer the Duelund with Cotton/Oil insulation for the signal wire on Interconnects and Speaker cables, but I prefer the faster dynamics of the UP-OCC copper on my system But realistically - all of the wires I mentioned above are excellent performers when used for Helix cables - it becomes a matter of "personal preference" and how well a particular component works with the selected wire(s). Hope that helps - Steve |
I am looking for a good source for the Neotech cable to build these cables (PC, IC, and speaker). The first question I have is do I want the stranded wire or the solid wire - as I think I see both in UP-OCC from Neotech? And I see options from SonicCraft at the moment - any other good options? Thanks! |
In all fairness, I would install better XLR connectors to conduct the test. Furutech make excellent XLR connectors at the same price point than KLE. I would also give them the mandatory 150 hours soaked time before reviewing their performance. I have just upgrade my Helix speaker and 1 RCA cables and can testify that some funky things are happening between the 25-40 hours mark.
Norco74 |
Just an FYI - SINGLE ENDED or XLR ? I just received these observations regarding XLR vs. Single Ended Interconnects...
I actually believe which cable type is ultimately superior is in fact due to the internal circuitry of the components being connected. But as others have observed - there is very little difference between the two I think both cable types perform to very similar levels and if you want the absolute best sound - then both cables should be built and tried in your own system before coming to any conclusions. Regards - Steve
|
@svampebob - I can’t say I have noticed an abnormally long break-in with speaker cables, particularly if they use the Air Adaption, but it is possible that the Bananas (or other connectors) are what is causing an overly long burn-in. I mention this because the KLEI RCA’s sound best after 300-400 hours and I believe my initial pair of speaker cables took 200-300 hours, but that was back a couple of years now, so I am working from my less than perfect memory here. I have reused all my plugs, so the break-in times of any more recent cables I have built can vary and cannot be considered a "benchmark". What I find interesting about your post is that you have managed to isolate a specific range of frequencies that seem to be impacted by break-in. Whereas, what I listen for is clarity and details in the venue acoustics, which in turn are responsible for changes in imaging, specifically artist focus and placement Definitely something to ponder for the future.👍 Thanks for the update - Steve
|
Hi good folks, I use double neotech SOCT-14 in tube in helix config for speaker wires for my bass/mid drivers. I use a great active crossover/eq so the frequency response does not matter too much as I can just adjust everything appropriately. When I installed the helix I had to dial in a low-shelf filter, meaning rising eq from around 200 - 1000Hz, in total 2,5db if I remember correctly. It sounded fantastic. After several 100 hours (I estimate 300) I have gradually turned it down and I am finding I have to remove it completely now. I can only see 1 reason, burn-in of the cables, everything else is burned in a long time ago. Have anyone else experienced this, that the mids takes a long time to open up and gain level? Naturally one could propose my ears are extremely bad, but it is not my impression. Unfortunately though I have a umik-1 I don’t have measurements, but i often run a sweep from bottom to top to confirm my impressions. When I adjust anything it is always based on many separate listening sessions. |
@norco74 - I didn't bother with any special handling or cleaning because I wanted to see how the bare copper fared without it. There as an initial very slight loss of brightness of the copper, but in the last 6 months the colour has not changed at all - I assume because the oxygen inside the Tube has been used up. I have a "sacrificial" piece of the same bare copper wire on the audio stand for comparison and that has tarnished much more I also looked at the ground wire that connects to the electrical panel and it too is still fairly bright after 6 years, so I am pretty certain that sealing the tube will prevent further oxidation, because teflon does not let the oxygen in the air through to the copper. If you do want to take extra care then Deoxit will do just fine. Regards - Steve
|
I have 2 pairs of Helix speaker cables from which I am driving a pair of Maggie 1.6 in bi-wiring mode with excellent results. Still using the Duelund cotton live wire, I was prepared to invest in making the UPOCC upgrade when I checked Steve’s latest mod on his website. The airgap mod is a logical one in this whole Helix development scheme of things. I am prepared to jump from the Duelund live wire to the dual UPOCC airgap mod but before I have some questions about cable oxydation and handling. -Would you advise to use latex/cotton gloves when manipulating to bare copper so any contaminants present on your fingers won’t end up on the bare wire? -Would it be beneficial to use Deoxit on the solid wire before inserting it in the PTFE tube? Not sure how to technically achieve this but it could be as simple as spraying the product on a shop towel and run the wire through it while inserting it in the PTFE tube. - Aside from sealing the PTFE with hot glue and a piece of shrinktubing, what else can be done to prevent wire oxydation? Cheers, Daniel
|
A friend who produces their own cables has a preferrence for for KLE Harmony Copper and Copper Wire. When they produced a set of Cables for myself, I supplied the Silver AECO RCA and there was not any comments made on a significant perceived change to the SQ when they were hooked up to the producers system. The Wire used was D.U.C.C and this had been perceived as having a added richness when compared to PC CCC. The Silver RCA, might have impeded the full richness of the Cable being delivered ? |
Just found these Atlas XLR plugs with silver plated OCC Cooper pins - I would have to believe that is about as good as XLR's get. https://www.analogueseduction.net/xlr-plugs-attenuators-and-adaptors/atlas-all-cu-xlr-plugs.html These AECO LR's would be a good second choice... http://Pair Of AECO XLR Connectors AMI-1060S Silver Plated Copper Contacts They would probably match the performance of the Harmony RCA's An FYI: A friend built extremely long 24 foot Single ended Helix cables and reported exceptional results, So they seem to work very well even at extreme lengths Regards - Steve |
I support Steve's statements. Anything longer than 2m use XLR. Find out, if your components both sides are fully balanced internally and not using a chip to only convert input/output signal from single ended to balanced. However, I never experienced a negative effect from balanced cables, they always are at least "on par" with single ended. Beside the wires you use, it is important to use good plugs and a good soldering technology with good solder. The wire must make direct contact with the solder pocket in the plug and use minimum amount of solder. The solder should only keep the wire in place and not "be" the conductor. Therefore I do not use "lead-free" solder with no high silver content, as the conventional solders without lead melt at lower temperatures and "flows" better. I use either Wondersolder or Cardas. Much preferred over all the lead free 4% silver solder from Mundorf, Furutech, etc. |
@wyan001 - XLR or Single ended - that is the question. Perhaps this is where synergy comes into play? I know that some prefer the XLR verson, while others prefer the Single ended version. But they all state that the improvements of one over the other are miniscule. Pehaps it is all down to the components in the system - they could have better circitry specific to one or the other. It could depend on the quality of the XLR plugs that improves on the single ended cables But - if there is lots of EMI/RFI in your "environment" then the XLR would be the way to go The only real way to find out is to build both and try them. Ufortunately I do not have XLR inputs on my amp so I am unable to compare them them. Regards - Steve
|
Dear Steve,
Thank you very much for the quick response.
Another relevant question, if I have the choice to go with XLR or RCA interconnects within 2 meters (by buying or building custom-tailor (pre)amplifiers), will Helix XLR be a better choice than RCA interconnect? You see, traditional wisdom usually says balance wire is better in trasmitting signal. However, Helix structure seems to greatly prevent noise pickup, as well as signal modulations between signal and return path, and therefore RCA interconnect might be very safe in this regard.
Thanks again.
Wayne |
@wyan001 - I’ll leave any comments on the USB cable to @grannyring since it his design and I have NO experience with this particular cable The XLR design on my web site is from another DIYer in Europe and is a single/single design. I am not sure if anyone has tried a Double/Double version - anyone built one? I am not sure if anyone has tried the "Air" aaption either - anyone built one? If I were to try building an XLR cable I would definitely go for the "Air" Adapton but opt to build a Double/Single version as follows: For each of the +ve and -ve conductors I would use - 2 x 18 or 20 gauge bare wires with each wire in their own Teflon tube - twist the two wires "gently" together (one tiwst every 3-4 inches) - NOTE: do not bother twisting the the two assembled conductors together - simply insert inside the Helix Coil - For the Helix Coil I would used a 1 x 16 gauge Solid Neotech Solid UP-OCC wire with Teflon insulation - but 2 x 16 gauge Solid Neotech Solid UP-OCC wire for the neutral Helix Coil could be used for a Double/Double design - you could also try 2 x 18 gauge solid UP-OCC wire with Airlok Insulation from VH Audoi for the Helix Coil - the Airlok insulaton has a slightly better Dielectric Constant value PLEASE NOTE - for the Air adapton the internal diameter of the teflon tube used only needs to be approximately 20%-25% wider than the diameter of the wire, which assures adequate air gap between the wire and the sides of the tube If you do NOT want to use the Air adaption simply use insulated wire for the +ve and -ve conductors - For this I would use 2 x 18 gauge solid UP-OCC copper with Airlok insulatoin from VH Audio. Hope that helps - Steve |
What a wonderful read! Thank you all for the sharing.
I have two questions that I cannot find a clear answer from Steve's site or in this thread.
1. For USB cable, is there significant improvement from AWG24 to AWG18? The USB type A and B connectors are usually designed for AWG24 and thus the question.
2. For double-double XLR interconnect build, what is the exact structure? a) Four runs of wires in total, with the V+ and one ground wire forming a helix set, and the V- and the other ground wire forming another helix set. b) Six runs of wire in total, with two V+ gentally twisted, two V- gental twisted and slightly apart from V+, and finally two ground wires forming a helix structure surrounding singal wires? c) or other?
Thanks a lot.
Wayne
|
Post removed |
@Guanghuy - here are some
The list is pretty long. The better way to approach this is to select an amp and then look for one of these keywords in the details
Or you can simply post your selected amp here and I will get back to you with an answer, Also look at the brands in my list that are identified as "Some models" because it tends to be only their very TOTL models that use the symmetrical differential approach If anyone else is using the Helix with their solid state amps please post the brand/model here There is a growing trend in the use of Symmetrical balanced architecture, so this list maybe somewhat "fluid" Hope that helps Regards - Steve |
Hi everyone, Steve suggested not to use Helix Speakers cable for amplifiers employ a Symmetrical, Complimentary, or Balanced outputs. Some of the names are:
Currently I am using Helix Speakers cable with my Single Ended Tube amp. However, I'm going need a Solid State amplifier with high output (300 watt/channel/ 8 ohm). My question is which brand and model that can be used with Helix Speakers Cables, could someone give me some names? Thank you. |
@tecknik - RE: Regarding wire being wound counter clockwise doesn’t wire that has been soldered need to be broken in again ( thought I read that somewhere and it certainly sounds that way when I’ve done that in the past ) and re winding the wire would require break in again of at least 50 hrs.It depends how critical your system and ears are :-)
Regards - Steve |