2. tech-talk
  3. 131691-99133

Buzzing just won't quit: Can someone please help?

Hello,
First let me thank you for taking the time to read my post. I’ve been trying to get this buzz out of my system that I just can’t lick. It’s really starting to drive me nuts. Here is a spectragraphic image of the sound https://imgur.com/a/xREqG. Here’s a WAV of the sound: https://drive.google.com/open?id=0B_YygM_VDhV9RWlPMEVudjBnb28 

My system:
Bryston BP17 preamp
2x Schiit Vidar poweramps, running in monoblock
Sonus Faber Venere 3.0 speakers.
Velodyne DPS10 sub
Schiit Gungnir MB DAC
Music Hall MMF 2.3 TT
Marantz NR-1604 AVR, w/ Roku, CC, and Blu-ray
Samsung Plasma TV
No cable

Facts:
- All devices are on the same circuit.
- The buzzing comes through on LR channels (powered by Vidars) and powered subwoofer, BUT NOT through the surround sound speakers, which are powered by the AVR.
- Poweramps, preamp, AVR, and TV are all on the same plug (via ATC power conditioning strip)

What I’ve tried:
-I have physically disconnected EVERYTHING except the poweramps and the speakers. Everything was unplugged and disconnected EXCEPT the poweramps to the speakers (Wall > Vidar amp (no input) > Venere speaker). Subwoofer unplugged/disconnected. This made no difference.
- I’ve tried an Ebtech HumX hum eliminators on the amps. Did nothing (though it did wonders for my plasma TV).
- I’ve tried switching around to different wall outlets (though all are on the same circuit).

What I’ve determined so far:
- The problem ISN’T the Schiit poweramps. I know this because I hear the buzz coming through the sub, which has its own power.
- The problem isn’t due to the 10000 devices I have because it occurs even when the entire system is disconnected except amps and speakers (with no input in the amp).

So what can I do? Is there some kind of fancy "power conditioner" thing I can buy? One of those Blue Circle Thingees? If I buy a power conditioner, does it have to have regeneration? Would something like a Panamax M5300-PM or something like that be adequate?

Please help me!
naseltzer

Showing 1 response by imhififan

imhififan's avatar
imhififan
2,108 posts
 
To diagnose the problem, unplug and disconnect everything and re-connect one thing at a time.
1. connect only one Schiit Vidar to a speaker, and plug in the power cord and turn it on, if no noise then go to the next step.
2. connect the other Schiit Vidar to a speaker, plug in the power cord and turn on both Vidar, if no noise then go to the next step.
3. Power off both Vidar, connect the Bryston BP17 preamp to one of the Schiit Vidar via XLR cable, power up the preamp and both Vidar, if no noise then go to the next step.
4. connect the other Schiit Vidar to the preamp and power up the preamp and both Vidar again, if no noise then go to the next step.
5. plug in the subwoofer, power up the subwoofer, preamp and both Vidar, if no noise then go to the next step.
6. connect the left channel line in of the subwoofer to the preamp line out, power up the subwoofer, preamp and both Vidar again, if no noise then go to the next step.
7. connect the right channel line in of the subwoofer to the preamp line out, power up the subwoofer, preamp and both Vidar again, if no noise then go to the next step.
8. plug in the DAC, power up the system, if no noise then go to the next step.
9. connect the DAC to the preamp line in, power up the system, if no noise then go to the next step.
10. play some music if no buzzing noise then you can connect the AVR, TV....
Hope you can find the culprit, good luck!  
More to discover