128x128

glennewdick

Responses from glennewdick

Streamer Fidelity: Aurender N200 vs A200 and Lumin U2 vs T3
Yes I used USB on both, if I remember correctly. but I have also used the optical as well,. My DAC is the Chord Dave used with both. If I was honest I had the A10 prior to me getting the Chord and the DAC in my Mac C2700 (DAC2 board) was better IM... 
Streamer Fidelity: Aurender N200 vs A200 and Lumin U2 vs T3
I preferred the U2 i demoed over the Aurender A10 i had ($6k), the Aurender was a disappointment in my system, and that app is just acceptable at best. The U2 was more lively, detailed and over all felt like music more. the A10 was just boring ( ... 
Differences in YouTube, Spotify, etc.
Tidal primarily, but also internet radio. never YouTube for music, Spotify is ok but lossless.   
DAC Suggestions
+ on the Chord DAC's   
Any one having issues with tubes on mcintosh c-12000 pre-amp
I have the C2700-MAC275, and no i have not had any tube failures yet 2+ years, but mac uses JJ tesla tubes they are ok at best and IMO the first thing you should change after buying a tube mac piece. I put in some relatively cheap RCA NOS small s... 
Line Magnetic 218a vs Leben CS600 -- am I insane? (aka when good beats great)
What tubes are in the amps are they the same type and make? Tubes make a huge difference in tube amps so even if they used the same tube types, if they are not the same tubes they will not sound the same. Also Tube type very in the sound signature... 
Is it even possible to get a factory authorized dealer to give a discount?
I've never got less then 15% discount at my local Hi-end store, on anything I've ever bought there. I get more on select items, usually the hi dollar items. One other Hi end shop here I asked for a discount (15%) and they gave some silly reply ab... 
Sansui 441 speaker recommendations
Pretty much anything from Klipsch would work.  the key is high efficiency 94db+ and stable 8ohm load. The older SS Sansui's did not like to push lower than 8ohm loads so no 4ohm speaker here. Also if the receiver has not be serviced yet get it se... 
Audio measurement: false validry or Strawman arguement.
We absolutely need measurements. to confirm the design, specs, correct performance to the design, etc. we need to confirm the design meets design intent and we need a base line. The real question is are we measuring all the right things? Can we e... 
Is it a Bad Tube or a Bad fuse (Fuse Fatigue)?
Why not put new fuses in and try it again? you don't have a tester so unless your going to change them all you have to try it with new fuses. If it blows the fuse again you know its a tube and will have a good idea which tube. just make sure you u... 
Aurender A Series DAC Performance
I've had the older A10 and the DAC was not as good as the one in my mac preamp C2700, DAC2 board, not sure if the newer ones are better but in my experience the DAC can be bested by an external DAC in the $2000 range. I doubt the Aurender DAC is g... 
McIntosh C52 to C53?
I had an Aurender A10 with the built in DAC and it was not as good as the built in DAC in my Mac C2700 ( DAC2 board) in my opinion anyway. The Aurender DAC was dry and rather boring sounding, the only thing I found it exceled at was it had a very ... 
for Technics SU-R1000 owners....unit already discontinued? where to service?
their web site directs you to one of their service centers in your area, have you reached out to the service center closest to you and ask them directly?   
Which turntable? Pro-Ject or VPI?
the RB300 is a great arm with lots of upgrade path, the carbon arm project makes is just ok. tables are probably close so what ever one you like the look of better. i bet is the VPI will hold its resale value longer.   
Seeking Honest Opinions: Your Experience with McIntosh Audio Gear
  immatthewj, the MAC SACD plyer i had I got in a trade deal and only tried one SACD and maybe a half doz CD's. So i can't rally talk about sound as i didn't even use the internal DAC in it. I sold it shortly after getting it as I stream now for...