2. misc-audio
  3. 1139686817

New to EQ

I have a problematic room for room treatment correction. It is big 30X40, used by family, so speakers have to go close to rear wall, lots of windows etc. I now hear about digital EQ. Do I have this right that such a system uses a microphone at the listening postion to assess the room problems, then digitally corrects at the preamp level? Do you have to leave the microphone up, or is that a one time deal? From the threads I hear that there are cheap (300) versions Beringers or something. On these do you use your own ears rather than the microphone and computer? Help. What should I be asking?
128x128gammajo
warnerwh
539 posts
 
Actually Gammajo nuance, detail and soundstage can be improved!

You want to go from the digital out of your preamp to the digital in of the Behringer then the digital out of the Behringer to the digital in of your dac. This way all the processing is kept in the digital domain so the rest is left upto your dac.

For the money it's a wonderful piece indeed. I hope you have already implemented room treatment if possible. With windows heavy drapes are best.

My system consists of a Primare Pre 30 preamp, Innersound ESL power amp, Sony transport, DEQ 2496 to a Bel Canto Dac 1.1. This is in a dedicated room that is live end, dead end with bass traps. I hear no loss of quality whatsoever. Not only that even with all the room treatment the Behringer has made it possible to dial in my system so well I doubt I could have it sound any better period. Best of luck to you. Some guy has one for 200 bucks right now under equalizers.
aball
2,016 posts
 
I use a McIntosh C42 and a Radio Shack digital SPL meter and my corrected response is surprisingly flat. The best part is that the C42's eq center frequencies are EXACTLY where all my room modes are. My room response is much better now than it was with Roomtunes and DIY bass traps.
eldartford
4,262 posts
 
Warnerwh...If you can get the Behringer into the signal path before D/A that is, at least in theory, the best way to go. However, if you play a SACD or DVDA there is no digital output from the player, and you need to use the analog inputs and outputs of the Behringer. That's what I do, and the A/D and D/A converters ain't bad at all.
More to discover