J River MJ12 Pops/Clicks-Effects help needed?


I just started using this player and love it. When i first used this player I applied some minimal effects to add some nice ambience to some live shows i have. Now when i go back to use the effects (to aid some recordings just a tad) i am getting these pops and clicks and it is even happening on the same file that i wasn't having these problems with prior? Does anyone have any advice or help to get rid of this problem so i can start using the effects again. I did switch from direct sound to the ASIO driver. I tried to go back to direct sound thinking that may have had something to do with it but those clicks are still there.
Any help would be greatly appreciated as i was really enjoying using the effects in a subtle manner and now can't as it is to annoying now. And it is happening even if i am using the clip protection feature in either direct or ASIO settings. I don't understand what would have caused this all of a sudden when it seemed to be working fine when i first was running the program and now it is not?
It is even clicking when the level is reading way below 100% and i am only adding 1 notch of effect and it is doing this.

thanks!
seekburk
The pops and clicks are probably caused by buffer underruns. MJ12 isn't always feeding audio data to the ASIO driver fast enough. There can be several causes:

- Too much other CPU activity competing with MJ123. When you turn on effects, you ask MJ12 to do more processing. Bring up task manager (Press Ctrl-Alt-Del to get Task manager running.) Click on the "Performance tab. Watch the CPU usage graph as you play music. Look for high usage and spikes in usage. Then click on the "Processes" tab and then click on the "CPU" column heading. Scroll down so that you are looking at the processes that use the most CPU time.

- Your CPU is just not fast enough to do the effects processing. Follow the Task manager drill as described above.

- Your ASIO buffer settings are just too small. In MJ12, bring up the Tools/Options/Playback menu and click on Output mode settings. You will see a slider for setting buffering. Your ASIO driver may have a way to set buffering through its control panel. Increasing the amount of buffering can also help with the CPU problems mentioned above.

- Your anti-virus s/w is checking every file you read. This can bring any Windows PC down to a crawl. for most A/V software, you can turn off the constant monitoring and just let it check email and downloads.

- If you are also upsampling in MJ12, that increases the amount of CPU time needed. It is not a good idea if your PC is old, slow or heavily loaded.

The clicks and pops probably have nothing to do with clipping.

The J. River forums for MJ and MC are a better plac eto get advbice than this forum. More users willing to help.

Bill
Thanks for all of that Oldlistener!!

But should i still be hearing this if i am averaging a total of 40% computer usage in my task manager? The highest peak i saw was a very quick 60%.

So yeah i am hearing those clicks with 40% computer usage as from what task manager is showing.
I closed out all other programs and it is still there but the thing is that i was able to use it just fine for a brief moment and then when i went back i started hearing this clicking when trying to use the effects

yeah my next step was to sign up over there at J River and post about this issue.

thanks again!
> But should i still be hearing this if i am averaging a
> total of 40% computer usage in my task manager?

Remember that I listed several causes. High CPU utilization figured into some of those causes and not others.

Keep in mind that audio playback is a real-time task. If the buffers ever underrun, you hear a pop. So if there is a momentary bottleneck that delays MJ12 from refilling the output buffers, the result isn't satisfactory. Windows doesn't have good facilities for reliable real-time The 40% and 60% numbers aren't impossibly high but it does suggest that your PC CPU isn't very fast for the job. Right now, I'm playing Flac files on a low end dual core AMD CPU and seeing 1% CPU utilization.

I suggested switching to the Processes tab in Task manager and watching the CPU utilization by individual processes. watching I/O activity is also informative.

I'd try increasing the buffering as I described in the first post. The current setting may just be wrong for your system. (There is a similar buffer setting for Direct Sound output in MJ12. You might switch to Direct Sound and play with that buffer setting to see if you get pops and clicks with a smaller buffer using Direct Sound.)

> I closed out all other programs

You may have to bring up the A/R program and change its settings. It probably will not appear as a task on the Start bar.

You haven't described your computer hardware and soundcard. When you post in the J. River forums, provide that information. You can get some of that info from the Help/System info command in MJ12.

Bill