Hi Viridian, yes that is true of the 6P3S-E but depending on how high the impedance is in the circuitry of the amp they can be used, they actually draw less filament current than an EL-34 which should make them a little easier on the amp. I've been reading Michael Samra's findings with this tube in EL-34 amps over on AA. If the impedance is on the lower side the tubes may be a mismatch.
Thoughts on current EL-34 tubes
I have just put my Jolida JD-1000P back into my system, and when I initially fired it up one of the tubes was obviously bad giving a good light show. I found this kind of strange as the amp has been sitting idle with no power to it for about six months now and the tubes Winged C Svetlanas were working fine when I took it out of the system. I replaced the winged C with another Svetlana for now and ordered up 8 matched Tungsol re-issues as I have heard that these tubes are some of the better of the re-issue tubes out now, what are everyones thoughts on current re-issue EL-34 tube available now.
- ...
- 28 posts total
- 28 posts total