Musical Fidelity V-Can Headphone Amp


I am interested in hearing from anyone who may have this inexpensive headphone amp. It is connected to my Krell amp with a set of Kimber Silver Streaks and am listening with Sennheiser D600's. At first, the unit sounded like a fork scratching a plate, after about 24 hours it calmed down quite bit, but after another 24 hours, no additional improvement. The sound is what I would call accurate, but it just seems like I'm listening to a "tin can quality". I know I could spend a lot more but I do not see myself using it very frequently, however, I would welcome any suggestions on how to get the best of this beast. I was told in three months they are coming out with a better power supply than the wall wart.
Thanks!
rpg
Here is the web site for a much better power supply. I have one for my V-DAC.

http://www.rock-grotto.co.uk/musical-fidelity-vcan-vdac-vlps-power-supply.html
I had one briefly and wasn't impressed. The sound quality after a couple of weeks was OK, but the real problem was the gain: the volume went from silence to unbearably loud very quickly. I'm much, much happier with the Creek OBH-11 I picked up to replace it. By comparison, the V-Can sounded hollow and shrill. And an "upgraded" Elpac power supply for the Creek can be had for $17.
Yes, I noticed the volume control would first bring in the right channel slightly before the left and I've learned this is normal. And yes, secondly, with my Sennheiser's, the volume would go from silence to screaming with a quarter turn of the volume pot. There must be some very hard to drive headphones out there!
I'd forgotten about the channel imbalance. The usable travel on the volume pot with my AKGs was more like 1/8 turn. They're pretty easy to drive, but those Sennheisers are a 300 ohm load, aren't they?!?