High Fidelity Cables CT-1designed by Rick Schultz


In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
Mtrot and Alpass, initially I was struck by the brightness of the CT-1, but it settled down shortly afterwards. If I recall correctly, the next day it was more balanced. It is the ease and clarity of the top end that is most impressive with the HF cables. I did not have much longer term experience with the CT-1s, but the CT-1 Es continued to improve for two weeks. I have heard others say that 1000 hours were needed. I haven't heard much happening this week. I think I have about 250 hours of active use of the cables.
It totally depends on your system. I had CT-1E's which were very nice and opened up after 20 hours, and again at about 100 hours. I currently have CT-1 Ultimate ics between source and preamp and at about 150 hours, they are finally starting to open up. By "open up", I mean clearer mids and highs with more inner detail and a fullness to the note after the initial attack. I also now have imaging outside of both speakers on a number of CD's. Soundstage is also deeper and the presentation is both more musical as well as more realistic. I can hear brass players taking breaths as well as which way singers are facing on some well-recorded CDs. Fretwork on guitars has become a given. I think they are about 1/2 broken in so far.... :-)
I actually found that the high frequencies (especially cymbals) were immediately clearer with the CT-1, compared to other IC cables. Using a quick switch, with an audiophile buddy also comparing, we found that cymbals were 'splashy' with the other IC cables, but more clear and distinct, more like live music, with the CT-1. If you think you may have heard more treble with your previous cables, try listening again and possibly you were hearing more treble volume, but only because of sloppy transients and high frequency hash.

And yes... the CT-1E is, as hard as it was for me to believe, noticeably better than the regular CT-1.
Charles1dad the CT-1 digital cable is signficantly better than any other digital cable I have had. In fact it was the first High Fidelity Cables product I had in my system.

But I will admit my experience with digital cables is not vast, unlike IC's where I have been around the block and know how good the CT-1 is with confidence.
agisthos,
Thanks for your response,I`ll give them some serious thought.I`m seeking a pure natural character yet high resolution cable(not hifi hyper detail emphasis).
Regards,