HELP Digital bad, vinyl good???

Yes. For several years. Vinyl relatively new; maybe about 2 weeks. Distortion started becoming apparent a few days ago; I thought the CDP might be going bad, so I plugged in my old CAL, w/diff I/cs and to a diff input.

I have not changed tubes because I always thought that the phono stage provided RIAA reverse eq; and gain to be bring the signal to line level, and then the line stage provided additional gain to the signal to provide sufficient voltage for the amp. If I am wrong (which it seems I must be), then I stand corrected. I will have to disconnect the phone and then check the line stage tubes.

Happy Christmahanukwanzadan everyone.

Swampwalker: your description is right in how most preamps work, but as Tvad mentions, we aren't sure that's how this specific preamp works. His suggestion to disconnect the phono rig from the preamp ( interconnects, ground wire, power cord, etc... ) is where i would start. After that, it is a matter of tracking down the offending tube in the preamp, if there is one ( or two if dual mono ).

As a side note, the phono stage may not drive the line section as hard as your CD players do. As such, you might not hear as much distortion from the phono rig as you do the CD player. This would be due to the increased heardroom / lack of drive from the phono stage. This is just a guess though, so don't put too much faith in it. Sean
>