Capacitor log Mundorf Silver in Oil


I wished I could find a log with information on caps. I have found many saying tremendous improvement etc. but not a detailed account of what the changes have been. I have had the same speakers for many years so am very familiar with them. (25+ years) The speakers are a set of Klipsch Lascala's. They have Alnico magnets in the mids and ceramic woofers and tweeters. The front end is Linn LP12 and Linn pre amp and amp. The speaker wire is 12 gauge and new wire.

I LOVE these speakers around 1 year ago they started to sound like garbage. As many have said they are VERY sensitive to the components before them. They are also showing what I think is the effect of worn out caps.

There are many out here on these boards I know of that are using the Klipsch (heritage) with cheaper Japanese electronics because the speakers are cheap! (for what they can do) One thing I would recommend is give these speakers the best quality musical sources you can afford. There is a LOT to get out of these speakers. My other speakers are Linn speakers at around 4k new with Linn tri-wire (I think about 1k for that) and the Klipsch DESTROY them in my mind. If you like "live feel" there is nothing like them. In fact it shocks me how little speakers have improved in 30 years (or 60 years in the Khorns instance)

In fact I question Linn's theory (that they have proved many times) that the source is the most important in the Hi-Fi chain. Linn's theory is top notch source with lessor rest of gear including speakers trumps expensive speakers with lessor source. I think is right if all things are equal but Klipsch heritage are NOT equal! They make a sound and feel that most either LOVE or hate. (I am in the LOVE camp and other speakers are boring to me)

So here goes and I hope this helps guys looking at caps in the future. Keep in mind Klipsch (heritage Khorns Belle's and Lascala's especially) are likely to show the effects of crossover changes more then most.

1 The caps are 30 years old and
2 the speakers being horn driven make changes 10x times more apparent.

Someone once told me find speakers and components you like THEN start to tweak if needed. Don't tweak something you not in love with. Makes sense to me.

So sound
Record is Let it Be (Beatles)
The voices are hard almost sounds like a worn out stylus.
Treble is very hard. I Me Mine has hard sounding guitars. Symbals sound awful. Everything has a digital vs. analog comparison x50! Paul's voice not as bad as John's and George's. Voices will crack.

different lp
Trumpets sound awful. Tambourine terrible. Bass is not great seems shy (compared to normal) but the bad caps draw soooooo much attention to the broken up mid range and hard highs that are not bright if anything it seems the highs are not working up to snuff. I have went many times to speaker to make sure tweeters are even working.

All in all they sound like crap except these Klipsch have such fantastic dynamics that even when not right they are exciting!

Makes me wonder about the people who do not like them if they are hearing worn out caps and cheap electronics? Then I can see why they do not like them! If I did not know better from 25+ years of ownership that would make sense.

For the new crossover I have chosen Mundorf Silver in Oil from what I have read and can afford. I want a warm not overly detailed sound as Klipsch already has lots of detail and does not need to be "livened up" they need lush smooth sounding caps. Hope I have made the right choice?

When the crossover is in I will do a initial impression on same lp's. Right now it goes from really bad (on what may be worn vinyl) to not as bad but NOT great on great vinyl. (I know the quality of the vinyl because tested on other speakers Linn)

The new caps are Mundorf Silver in Oil and new copper foil inductors are coming. I will at the same time be rewiring the speakers to 12 guage from the lamp cord that PWK put in. PWK was a master at getting very good sound often with crap by today's standards components.

The choice of speakers would be a toss up now depending on what I am listening to. Klipsch vastly more dynamic but if the breaking up of the sound becomes to much to effect enjoyment the Linn would be a better choice on that Lp. If I could I would switch a button back and forth between speakers depending on song and how bad the break-up sound was bothering me.

volleyguy
Hello Charles,
I feel extremely fortunate to have scored the older NOS Mullard High Wycombe CV378 "Fat Bottle". I spoke with Israel about this tube as well as "skinny bottle"; he was very enthusiastic about this tube plus liked the slow start. I read Dubstep Girl review of 5U4GB and their equivalent tubes. I must say she is accurate in her assessment on the brands I have tried. Dubstep was reviewing with a Woo headphone amp, so not apples to apples, but it worked out alright. Yazaki-san likes the NOS GEC and Marconi types like U52, for example, as well as some others. Yazaki-san sent Jeff Day a really nice NOS 5U4G rectifier under the Haltron banner, but since they never made their own tubes I wonder what it is? I'll have to ask.
Charles,
A simple note on the Coincident Dynamo 34SE: as I suspected from the start that this little amp would respond well to upgrades, I must say it has exceeded my expectations. The Dynamo has responded to every tube or wire change in a significant and meaningful manner. All the listening attributes enumerated above in "timbral listening" are truly being met with enormous success with some quality frosting on the cake as Jeff Day stated; for example, the soundstage is big, well-defined, holographic, if you will. Imaging, excellent. On well-recorded material this amp is astounding. It is difficult for me after all these years to comprehend it. And to think, "the best is yet to come," with the Yazaki-san guided changes to capacitor, resistor and internal wire. "Lions and Tigers and Bears, oh my!!!" Best, Rob
Hi Rob,
I believe that when you start with a fundamentally solid foundation and good design, the amplifier responds to upgraded high quality parts/tweaks. Keep in mind that you have speakers that allow this amplifier to reach its potential sonic/musical performance.
Charles
I am looking at getting some of the Western Electric wire just want to make sure I get the correct one. Any advice? Tajacobs? On ebay and does colour matter? I want to rewire internals in speaker in office as well which is getting much better. (all those Jupiter, Jensen and VCaps in the amp)

I have been reading the thread on audiogon on the Western Electric.

Cable has always been kind of the joke of the industry. Crazy money and if you are feeding the signal through crappy crossover parts it is just crazy.

I have always wondered about Western Electric and not just the wire. They seemed to be on to something. Many of their parts still regarded as at the top.
Yes purchase only from the ebayer you mentioned. Get the 14 gauge stranded only. Can be black or red from the seller. Get ready for a big positive surprise! Oh my!