need ideas to raise speaker stands


hey guys, i need some ideas to raise speaker stands a few inches to accomadate new monitors. stands have spikes. i would like to consider raising them inexpensively as oppose to purchasing new ones, at least in the short term. i know you guys are clever!!!! give me some ideas.

alan
zonus
I have to disagree with Paulwp. I believe your sound will be better if the speakers are coupled to the stands rather than isolated. I use "bluetack", but in a very small amount, just to prevent scratching the bottom of the speaker and keep it from sliding on the stand.

Regarding how to raise the stands: Are your current stands spiked to the floor? Can you build a small platform and transfer the spikes to the platform? Maybe use some paving stones to give it some height and weight, and place your stands on top of that.

Another idea would be to get some threaded studs the same size as your spikes, and some short lengths of tubing with the same threads on the inside. You could then "extend" your spikes. However, this could cause some stability problems, depending on how much height your trying to achieve.

Neither of these are ideal fixes, but you were looking for suggestions.

JD
Well, I disagree with Ken. Roller blade wheels are better than hockey pucks.

There are all sorts of coupling devices, tiptoes? cone-like things. If that's what you want to do.
Go to your friendly neighborhood stone mason and have him cut you some slabs of granite. Ensure the measurements are exactly the same as your monitors' bottom sides. Make sure you specify the thickness which will depend on high you want them raised. You can then put these bases on top of your speaker stands. Use some BLUE TACKS on both sides to secure the bases to the speaker stands and your monitors on top of the stones. This is just another suggestion, I think JDOMBROW's idea is superb.
If the spikes are adjustable tilt the front of the stands up a fraction of an inch. A minute rise (@ the front of the stands) makes a big difference in the firing angle @ 8-12 feet away.

Material, like Paul suggests, (not the roller blades:-) might work well with his Harbeths as the cabinets are designed to resonate within a certain frequency range (you want them to vibrate as they are tuned this way).

I suspect that this might also be true of the Coincident Triumphs as the ones I tried sounded best on cheap/flimsy stands (not heavy/rigid ones).