Acoustat servo amps ??

Kubla, if you send me your phone number I'll give you a call and share my 23 years of experience with Acoustats. I am a former dealer who sold monitor IIIs and have had 2+2s for the past ten years. Just bought another pair of 2+2s this week (these have the Medallion interfaces) and haven't even uncrated them as yet. Don

If you want to hear Accoustats at their best, the servo amps are the way. One of the best stat systems I have heard over the years was a pair of Accoustat 2+2's with servos. Unfortunately, the servos are hard to find and expensive when you do find them these days. There is a cult for these amps, so most of them have been hunted down and are in the hands of people who know their worth. I have a friend with a pair but he won't part with 'em...just in case he gets "Accoustat Fever" again. Happy Hunting!

Well, yes, the servos can be great, but there are MANY different mods and levels of servos -- the best (and most lethal, literally) in my experience, are the AHT/Dan Fanny modified units that use the 6LB6 tubes and dual 7308 input drivers. Please note that high-voltage parts are sometimes hard to locate and these amps do require regular periodic maintenance to ensure top performance and to replace certain components BEFORE they disintegrate.

One advantage to the 6LB6 servos is that they can drive up to 8 panels per amp -- so if you own Acoustat Sixes or Eights, you don't need 2 amplifiers per speaker; one will do nicely.

Of the Acoustats I have owned the ones that I liked the best were 2+2s and IIIs. The Sixes are great with the AHT-modified servos if your listening room is VERY large (mine wans't big enough). They are capable of playing unbelieveably loud, with tremendous bass. A few of my friends own these systems/amps and are quite happy. :)

I have since moved on to the InnerSound Eros because it plays loudly and precisely, is smaller, and I no longer have to worry about dealing with the attention the servos require.

thanks for the posts everyone.

plato et al: i have found a pair of monitor 4s w/ the servo amps ($1600) and was wondering if anyone was able to compare what these might sound like (i'll drive to hear them next week if it seems promising) compared to my model 3s with the transformers or model 3s potentially 'upgraded' with separate servo amps i might find.

thanks

If the servos on the IVs are stock and the ESL panels are early generation vintage, then factor in the operational condition of the amps and tubes and I'd say you have a heck of a lot of variables and a wide performance span. Heck, the only way to sort that out is to go have a listen.

What vintage are your IIIs, anyway? --original coarse 3-wire, OFC-copper 3-wire with improved coating, or 5-wire version?

I will say that if the IVs are early vintage and the amps are stock then $1600 is probably top-dollar -- and that provided they are in good working order. You may be much better off picking up a good pair of updated/modified servos and using your present IIIs if they are at least the OFC-version panels.