I realized that I messed up a bit on my last post. I just checked the Boulder website (still drooling :-) here) & confirmed my suspicions that the 1012 is a DAC / pre combo, so my statement that "the preamp doesn't have to be powered on" is obviously wrong in this case (would apply correctly to a standalone DAC with separate pre).
So now Kelly, you'll also need to breakin the analog stage, the line stage, & the aes inputs. I believe that the phono board will terminate it's input regardless of input selector switch position, so that could likely be run simultaneously while the digital input is also cooking. Regarding your analog tuner & aes inputs, I wonder if those input stages terminate only when those switch positions are selected? Call Boulder to find out & if it does terminate then you can also breakin those simultaneously; if not, then obviously they will have to be done separately at a later time.
I hope this all makes sense; frankly I'm not accustomed to dealing with hardware at this performance level, but it's still nice to share a bit in your fun. Please do let us know how it all sounds; I'm sure that it'll be a real treat!
So now Kelly, you'll also need to breakin the analog stage, the line stage, & the aes inputs. I believe that the phono board will terminate it's input regardless of input selector switch position, so that could likely be run simultaneously while the digital input is also cooking. Regarding your analog tuner & aes inputs, I wonder if those input stages terminate only when those switch positions are selected? Call Boulder to find out & if it does terminate then you can also breakin those simultaneously; if not, then obviously they will have to be done separately at a later time.
I hope this all makes sense; frankly I'm not accustomed to dealing with hardware at this performance level, but it's still nice to share a bit in your fun. Please do let us know how it all sounds; I'm sure that it'll be a real treat!